Schalksmühle, 17.10.2015. Power supply connectors are a common feature in almost all industries. Whether of short, long, straight or angled design, with or without solder eye or bend protection, whether for printed circuit boards or front side mounting, Lumberg has been offering the relevant deep product range to the market for decades. Even power supply chassis sockets can already rely on an array of snap-in products from the product range for easy screw assembly. However, socket called 1610 05 with snap-in front side mounting for a 2 amps current carrying capacity at a 24 V DC rated voltage for devices with higher than conventional loads, is new.

This straight socket version inclusive of solder eye which is held in place in the casing with locking latches, mechanically snaps in the plastic base at the front side of the casing, offering added, integrated protection against twisting from one side that is flattened. Conventional geometrics from the opening diameter of 5.8 mm or the diameter of a center pin of 2.95 mm, are equally upheld as are insertion or extraction forces of 4-30 N. The power supply chassis socket is designed for a temperature range of between -20°C and 60°C.

Total no. of characters incl. blanks: 1.275