03
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP68
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting
Technical Data
Environmental conditions
Temperature range: -40 °C/+85 °C
Materials
Insulating body: PA, V-2 according to UL94
Contact bush: CuZn, silver-plated and flash gold-plated, tin-plated in solder area
Housing: Zn diecast, pre-copper and nickel-plated
Seal: CR (flat), NBR (O-ring)
Mechanical data
Insertion force/contact: ≤ 5.0 N *1
Withdrawal force/contact: ≥ 1.2 N *2
Protection class: IP68/67 *3
1) measured with a polished steel pin, nominal thickness 1.5 mm
2) measured with a polished steel pin, nominal thickness 1.5 mm
3) according to IEC 60529/DIN EN 60529
IP68: sealed in locked position; pair of appropriate connectors in locked
position is sealed against ingress of dust and moisture.
IP67: sealed when unmated (SWUM™); no dust or moisture can ingress into the inside of the device through an unmated connector accidentially left unprotected.
IPX8 requirements under agreement between user and manufacturer
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 5 A (Tamb 40 °C)
Rated voltage: 100 V (with pollution degree 1)
32 V (with pollution degree 2)
Rated impulse voltage: 500 V
Counterparts
0331
Plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals
0332
Plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
0332-1
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
033200
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly
0365
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°
036500
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly
Further products on request
Cable assemblies with connectors 0332-1 and 0322-1 acc. to AISG specification
Further products on request
Cable assemblies with connectors 0315-1 U and 0305-1 U acc. to AISG specification and RAST 2.5 direct connector 3517 (RAST 2.5, insulation displacement technology)
Accessory
0381
Protecting cap, IP68, for sockets, with chain
038199
Protecting cap, IP68, for sockets, without chain
038799
Protecting cap, IP68, for sockets, without chain
0384
Hexagonal nut for chassis plugs and sockets (spare part)
0385
Slit nut for chassis plugs and sockets (spare part)
0322 C 16
Flat gasket for sockets 030..., 032..., 036... (spare part)