03
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP68
SWUM™ flange chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
Technical Data
Environmental conditions
Temperature range: -40 °C/+85 °C
Materials
Insulating body: PA, V-2 according to UL94
Contact pin: CuZn, silver-plated and flash gold-plated
Housing: Zn diecast, pre-copper and nickel-plated
Seal: NBR
Mechanical data
Protection class: IP68/67 *1
1) according to IEC 60529/DIN EN 60529
IP68: sealed in locked position; pair of appropriate connectors in locked
position is sealed against ingress of dust and moisture.
IP67: sealed when unmated (SWUM™); no dust or moisture can ingress into the inside of the device through an unmated connector accidentially left unprotected.
IPX8 requirements under agreement between user and manufacturer
Connectable conductors for solder area
Section: ≤ 0.75 mm² (AWG 20)
Electrical data (at Tamb 20 °C)
Rated current: 5 A (Tamb 40 °C)
Rated voltage: 100 V (with pollution degree 1)
32 V (with pollution degree 2)
Rated impulse voltage: 500 V
Counterparts
0321
Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals
0322
Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, 360° shielded
0322-1
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
032200
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly
0360
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°
036000
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly
Further products on request
Cable assemblies with connectors 0332-1 and 0322-1 acc. to AISG specification
Further products on request
Cable assemblies with connectors 0315-1 U and 0305-1 U acc. to AISG specification and RAST 2.5 direct connector 3517 (RAST 2.5, insulation displacement technology)