33
RAST 1.5 connectors, pitch 1.5 mm
RAST 1.5 connector for direct and indirect mating, insulation displacement technology (IDT)
| State: | New |
Technical Data
Environmental conditions
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PA GF, V-0 according to UL94 *1
Contact spring: CuSn, tin-plated
1) material halogen-free and ATO-free, component glow wire resistant (GWEPT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 2.0 N
Withdrawal force/contact: ≥ 0.3 N
Connectable conductors for IDT area
Construction: discrete conductor
Section min.: 0.22 mm²
Section max.: 0.22 mm²
Insulation diameter: ≤ 1.2 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Rated current: 3 A (Tamb 85 °C, VDE)
Rated voltage: 50 V
Approved Cables
Approved Cables for 332100 S00Download (PDF)
| Conductor | Insulation | Manufacturer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
| 332100 S00 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,1 -1,2 | PVC | -40/+105 | Leoni | 76783002# | FLRY 0,22-A |
| 332100 S00 | 0,22 | 7 x Ø 0,2 mm | 7–9 | - | 1,15 ± 0,05 | TPE | -40/+125 | Leoni | 88260330# | LI31Y 1x0,22 BL SKT 1,15 |
| 332100 S00 | 0,22 | 7 x Ø 0,2 mm | 9 | - | 1,15 ± 0,05 | TPE | -30/+125 | Omerin | Q0507001 | PLASTHERM 41 0,22mm² |
| 332100 S00 | 0,22 | 7 x Ø 0,2 mm | 7–9 | - | 1,15 ± 0,05 | PVC | -40/+70 | Leoni | 8800001NA | LIY 1X0,22 BL |
| 332100 S00 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 7–9 | - | 1,15 ± 0,05 | PVC | -5/+90 | Leoni | 8800001MA | LiYW 1x0,22 BL |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
04/2024