35
RAST 2.5 connectors, pitch 2.5/5.0 mm
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
| Approvals: | cULus |
Technical Data
Environmental conditions
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PBT, V-0 according to UL94 – 3523-2 (S...V...)
PA, V-2 according to UL94 – 3523-2 M12(S...V...) *1
Contact spring: CuSn, tin-plated – 3523-2 (M...S...)
CuSn, tin-plated (Sn/Ag), 2-9 poles – 3523-2 (M...S...)V03
CuSn, pre-nickel and gold-plated – 3523-2 (M...S...)V102
1) M12: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 4,0 N
Withdrawal force/contact: ≥ 0,5 N
Connectable conductors for IDT area
Construction: discrete conductor, flat cable 2.5 mm
Section min.: 0,14 mm²
Section max.: 0,38 mm²
Insulation diameter: ≤ 1,6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 4 A (Tamb 60 °C)
2 A (Tamb 100 °C)
Rated voltage: 250 V AC
Counterparts
3552
RAST 2.5 pin header, with locking latch and positioning spigot
contact pitch 5.0 mm
355299
RAST-2.5-plus™ pin header, upright, with locking latch and positioning spigot, with double-sided keying
contact pitch 5.0 mm
355295
RAST 2.5 plus™ pin header, upright, in surface mount technology (SMT), with locking latch and one or two positioning spigots, with double-sided keying
contact pitch 5.0 mm
3556
RAST 2.5 pin header, angular, with locking latch
contact pitch 5.0 mm
3542
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3542-1
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3546
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3546-1
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
83546
RAST 2.5 double chassis pin header, with locking latches contact pitch 5.0 mm
Accessory
Harnessing Equipment
HZ35
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ-M35
Modular manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard
KHP35
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HA35e
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible
HA35e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible
HA35e-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated removal of connector chain interlinks, limited upgrading possible
HA35f
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, individual upgrading possible
HA35f-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated cable color detection, individual upgrading possible
HA35f-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible
HA35f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test
HA35f-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible
HA35f-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible
HA35f-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for removal of connector chain interlinks, individual upgrading possible
HA35f-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks and cable color detection, individual upgrading possible
HA35f-RK-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, individual upgrading possible
HA35f-RK-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-RK-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, fully eqipped with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, keying testing and high-voltage test
HA35f-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for high-voltage test, individual upgrading possible
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
New
VARICON 7000-Unica-35
Fully automatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for divers harness configurations
VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
New
VARICON 7000-DC
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, for flexible harness configurations, machine to be adapted to the application's requirements
New
VARICON 7000-DC-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses combined with additional crimp contacts, for flexible harness configurations, machine to be adapted to the application's requirements
Approved Cables
Approved Cables for 3523-2 Download (PDF)
| Conductor | Insulation | Manufacturer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
| 3523-2 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,35 ± 0,05 | PVC | +105 | Klasing | 50154xx | |
| 3523-2 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,4+0,05/-0,1 | PVC | +70 | Monette | 19.302X | 2,5FL - LiYV |
| 3523-2 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,4+0,05/-0,1 | PVC | +105 | Monette | 19.312X | 2,5FL - LiYV |
| 3523-2 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 8,9 | Sn | 1,4 | PVC | +105 | Medi | 524703 ... | FBL LIY/ZGL x AWG 24 |
| 3523-2 | 0,22 | 7 x 0,20 mm ribbon cable | < 18 | Sn | 1,35 ± 0,05 | PVC | -30/+105 | Klasing | 2,5 FL-LiYV 7 x 0,22 mm² ZG, STL 902 06 | 7 x 0,22 mm², grau |
| 3523-2 | 0,23 | 7 x Ø 0,203 mm ribbon cable | 16 | Sn | 1,35 ± 0,05 | PVC | +105 | Klasing | 50253xx | FL-ZGL XXx0,23 1,35 R2,5 |
| 3523-2 | 0,23 | 11 x Ø 0,16 mm ribbon cable | 16 | Sn | 1,4 ± 0,1 | PVC | 105 | LTK | SK-2651-202 | PVC-isolierte Flachbandleitung 24 AWG |
| 3523-2 | 0,35 | 7 x Ø 0,245 | 17 +/- 1,7 | Sn | 1,4 ± 0,05 | PVC | -15/+70 | Vercavi | HP 1035----S5 | FR2 1 x 0,35mm² |
Approved Cables for 3523-2 S01
| Conductor | Insulation | Manufacturer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
| 3523-2 S01 | 0,35 | 7 x 0,241 mm | 15 | Sn | 1,35 ± 0,05 | PVC | 70 | Prysmian | 20149750 | LiY Sn 1 x 0,35mm² |
Approved Cables for 3523-2 S02
| Conductor | Insulation | Manufacturer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
| 3523-2 S02 | AWG 24 | 1 x Ø 0,51 mm | - | Sn | PE | -40/+105 | Sumida | Fxx-Pxxx-002 | Panta-Fix Jumper | |
Approved Cables for 3523-2 S03
| Conductor | Insulation | Manufacturer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
| 3523-2 S03 | 0,34 | 7 x 0,26 mm | 15 | Sn | 1,4 ± 0,1 | PVC | -40/+105 | KBE | 5000340110250A | LiY 0,34 mm² |
| 3523-2 S03 | 0,34 | 17 x 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | 80 | Leoni | 10.097.999F5007 | AWG 22 |
| 3523-2 S03 | 0,35 | 7 x 0,25 mm | 5-10 | Sn | 1,25 ± 0,03 | PVC | -40/+70 | Leoni | 88030810# | LiY 0,35 mm² |
| 3523-2 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,35 +0,1/-0,05 | PVC | -10/+105 | Vercavi | HH1035----SF | FR 3/2 1 x 0.35mm² |
| 3523-2 S03 | 0,355 | 7 x Ø 0,245 mm | 17 ± 10 % | Sn | 1,55 +0,02/-0,04 | PCV | -25/+105 | KBE | 4100225110245K | AWG 22 Style 1569 |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
11/2024