03
Circular connectors with threaded joint M16 acc. to IEC 61076-2-106, IP40/IP68
![](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly
技术数据
环境条件
Temperature range: -40 °C/+85 °C
物料
Insulating body: PA GF, V-0 according to UL94
Contact pin: CuZn, silver-plated and flash gold-plated (3-8 poles)
CuZn, pre-nickel and gold-plated (12-14 poles)
Schirmfeder: stainless steel
Insulating sleeve: PA, V-0 according to UL94
Clamp: PA, V-0 according to UL94
Housing: CuZn, nickel-plated/Zn diecast, pre-copper and nickel-plated
Knurled screw: CuZn, nickel-plated
Seal: CR/EPDM
机械数据
Protection class: IP68 *1
1) according to IEC DIN EN 60529, only in locked condition with an appropriate counterpart; IPX8 requirements under agreement between manufacturer and user
可连接的电线用于焊接连接
Section: ≤ 0.75 mm² (AWG 20)
(3-8 poles)
≤ 0.25 mm² (AWG 24)
(12-14 poles)
Cable diameter: 4–8 mm
8–10 mm optionally
电气数据(Tamb 20 °C)
Rated current: 5 A (Tamb 40 °C, 3-8 poles)
3 A (Tamb 40 °C, 12-14 poles)
Rated voltage: pollution degree 1:
300 V (versions 03, 04, 05-1, 06, 07)
100 V (versions 05, 05-3, 07-1, 08, 08-1)
160 V (versions 12, 14)
pollution degree 2:
250 V (versions 03, 04)
160 V (versions 05-1, 06, 07, 12, 14)
32 V (versions 05, 05-3, 07-1, 08, 08-1)
Rated impulse voltage: 1500 V (versions 03, 04, 05-1, 06, 07, 12, 14)
500 V (versions 05, 05-3, 07-1, 08, 08-1)
配对件
![0321](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0321
Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals
![0322](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0322
Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, 360° shielded
![0322-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0322-1
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
![032200](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
032200
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly
![0360](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0360
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°
![036000](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
036000
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly
![0304](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0304
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
![0304-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0304-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
![0305](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0305
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting
![0305-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0305-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting
![0362](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0362
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for front mounting
![0363](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0363
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for back side mounting
![0306](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0306
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting
![0306-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0306-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting
![0307](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0307
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting
![0307-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0307-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting
![030798-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
030798-1
Chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and ground contact, for printed circuit boards, for back side mounting
![0308](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0308
Flange chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
![0308-1](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0308-1
Flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and solder terminals, for front mounting
![036297](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
036297
Flange chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for front mounting
![0304-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0304-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
![0305-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0305-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for back side mounting
![0306-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0306-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for front mounting
![0307-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0307-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting
![030799-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
030799-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting, with hexagonal nut
![030798-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
030798-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and ground contact, for printed circuit boards, manual soldering, for back side mounting
![0308-2](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0308-2
SWUM™ flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
![0305-1 U](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
0305-1 U
Chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint, cables and potted solder area, for back side mounting
![Further products on request](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
Further products on request
Cable assemblies with connectors 0332-1 and 0322-1 acc. to AISG specification
![Further products on request](https://www.lumberg.com/wp-content/themes/lumberg/images/trans.png)
Further products on request
Cable assemblies with connectors 0315-1 U and 0305-1 U acc. to AISG specification and RAST 2.5 direct connector 3517 (RAST 2.5, insulation displacement technology)