35
RAST 2.5 connectors, pitch 2.5/5.0 mm
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of enhanced locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
技术数据
环境条件
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
物料
Insulating body: PBT, V-0 according to UL94 – 3518-4 S03V...
PA, V-2 according to UL94 – 3518-4 M12S03V... *1
Contact spring: CuSn, tin-plated (Sn/Ag) – 3518-4 (M...)S03V03
CuSn, pre-nickel and gold-plated – 3518-4 (M...)S03V102
1) M12: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
机械数据
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 4,0 N *1
Withdrawal force/contact: ≥ 0,5 N *2
Retaining force/locking: ≥ 13,4 N *3
1) measured with a polished steel pin, nominal thickness 1.5 mm
2) measured with a polished steel pin, nominal thickness 1.5 mm
3) measured with a polished steel gauge, nominal thickness 1.5 mm
IDT区域可连接的导线
Construction: discrete conductor, notched flat cable 2.5 mm
Section min.: 0,14 mm²
Section max.: 0,38 mm²
Insulation diameter: ≤ 1,6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
电气数据(Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 4 A (Tamb 60 °C)
2 A (Tamb 100 °C)
Rated voltage: 250 V AC
线束组装设备
HZ35
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ-M35
Modular manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard
KHP35
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HA35e
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible
HA35e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible
HA35e-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated removal of connector chain interlinks, limited upgrading possible
HA35e-DC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, machine to be adapted to the application's requirements
HA35f
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, individual upgrading possible
HA35f-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated cable color detection, individual upgrading possible
HA35f-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible
HA35f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test
HA35f-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible
HA35f-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible
HA35f-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for removal of connector chain interlinks, individual upgrading possible
HA35f-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks and cable color detection, individual upgrading possible
HA35f-RK-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, individual upgrading possible
HA35f-RK-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-RK-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, fully eqipped with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, keying testing and high-voltage test
HA35f-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for high-voltage test, individual upgrading possible
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
VARICON 7000-Unica-35
Fully automatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for divers harness configurations
VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-DC
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, for flexible harness configurations, machine to be adapted to the application's requirements
VARICON 7000-DC-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses combined with additional crimp contacts, for flexible harness configurations, machine to be adapted to the application's requirements
批准的电线
批准的电线,用于 3518-4 Download (PDF)
导体 | 绝缘 | 制造商 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | 截面积 (mm²) |
结构 | 绞距 (mm) |
表面处理 | 直径 (mm) |
材料 | 温度范围 (°C) |
名称 | 名称 | 描述 |
3518-4 | 0,14 | 7 x Ø 0,16 | 8,7 | Sn | 1,28 | PVC | +80 (UL)/+90 (CSA) | Sumitomo | CSA Type TR-64 FT1 Sumitomo-x (x= sz, y= m) | AWM1007 LF CSA TR-64 |
3518-4 | 0,14 | 7 x Ø 0,16 mm | 6 ± 0,5 | Sn | 1.25 | Silicone | -50/+180 | Leoni Silitherm | ST0101§ | SIF AWG 26 (0,14) |
3518-4 | 0,14 | 7 x Ø 0,16 mm | 11–13 | Sn | 1 | NHFR | 105 | LTK | E148000 | UL10368 - 26AWG |
3518-4 | 0,14 | 7 x Ø 0,16 mm | 12 | Sn | 1,3 ± 0,08 | PVC | +105 | LTK | SP-1569-021 | UL 1569 AWG 26 |
3518-4 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3518-4 | 0,2 | 1 x Ø 0,50 mmribbon cable | Sn | 1,35 ± 0,1 | PVC | +90 | Ernst & Engbring | 115506040173 | FL-5YV 2, 10 x Ø 0,5 mm² | |
3518-4 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3518-4 | 0,20 | 1 x Ø 0,50 mm | - | 1,00 ± 0,05 | PVC | -40/+105 | Berne | 704 VU 04 08 RA | Câble Rigide 4 x 0,2 mm² | |
3518-4 | 0,21 | 12 x Ø 0,15 mm ± 0,005 | 8 ± 1,6 | Sn | 1.4 | PVC | 105 | Başoğlu | BC-PVC AWG 24 | UL 1569, AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 7,7 | - | 1,12 ± 0,01 | FEP | +180 | HEW/CDT | 2669 | HEW-FEP-TE Cu vz AWG24 |
3518-4 | 0,22 | 19 x Ø 0,127 mm | 7 | Sn | 0,96 | PTFE | +180 | HEW | 18880 | HEW-PTFE/ Silikonltg./ TEHSI-Cu vn 2xAWG24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,3 ± 0,1 | TPE | +125 | HEW/CDT | 26613 | HEW-TPE-E-Y Cu vz 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,1 ± 0,05 | FEP | +180 | Monette | 56754 | Li6YV 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,3 ± 0,05 | FEP | +180 | Monette | 60412 | Li6Y 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 12,7 | - | 1,4 | PVC | +105 | Cable Tech | 702899 | AWG 24/ UL 1569/1007 |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,35 ± 0,05 | PVC | +105 | Klasing | 50154xx | |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 15 | Sn | 1,5 ± 0,05 | PVC | +105 (UL)/+80 (CSA)/+90 | Medi | 120247 ... | |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,4+0,05/-0,1 | PVC | +70 | Monette | 19.302X | 2,5FL - LiYV |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,4+0,05/-0,1 | PVC | +105 | Monette | 19.312X | 2,5FL - LiYV |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,42 | PVC | +105 | Hamlin | 32743-581216100. | UL1569/24AWG WIRE |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 8,9 | Sn | 1,4 | PVC | +105 | Medi | 524703 ... | FBL LIY/ZGL x AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 8,5 | Ag | 1,12 | PFA | +200 | Habia | 548xx2407 | H-A 2407 |
3518-4 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 ± 0,1 | PVC | +105 | Leoni | 76783002K | FLRY 0,22 -A |
3518-4 | 0,22 | 7 x Ø 0,20 | 9 | Sn | 1,0-1,2 | PVC | -40/+120 | Omerin | Q 0108 Indice A, Variante 04 | 0,22mm² AWG24 |
3518-4 | 0,22 | 7 x Ø 0,22 mm | 8,6 | Sn | 1,1 ± 0,1 | PVC | UL +80CSA +90 | Leoni | 89440080A | LiYW 0,22 Sn AWG 24/7 SKT |
3518-4 | 0,22 | 7x Ø 0,202 mm | 9 | Sn | 1,4 ± 0,1 | PVC lead-free | -30/+105 | Leoni | 89460080A | LIYW 0,22 mm² SN AWG 24/7 UL 1569 CSA T1 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 9 | Sn | 1,52 ± 0,02 | PVC | +80 | Belden-EIW | BG 6060 | LiY 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 35 | Sn | 1 | Silicone | +200 | Omerin | G1009005 | SONDIX MC-CNPFA |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 9,4 | Sn | 1,40 | PVC | +105 | Viakon | OW 76 | 24 AWG AWM Style 1007/1569 105C |
3518-4 | 0,22 | 7 x Ø 0,16 mm | 18 | Sn | 1,45 ± 0,05 | PVC | +90 | Pan | UL 1007 Hook-Up Wire | UL 1007 AWG 24 STR 11/0,160 |
3518-4 | 0,22 | 7 x Ø 0,202 mm | 9 | Sn | 0,25 | TPE-S | -40/+125 | Leoni | 88A00007 | LI31xy |
3518-4 | 0,22 | 19 x Ø 0,13 | < 17 | Sn | 1,45 ± 0,1 | PVC | -30/+105 | Amokabel | 1608 | AWG 24 UL1569 FT Slits |
3518-4 | 0,22 | 7 x Ø 0,21 | 9 | Sn | 1,4 ± 0,10 | PVC | -40/+105 | Leoni | 89460080# | LiYW 0,22 SN AWG 24/ 7 |
3518-4 | 0,22 | 7 x Ø 0,193 mm | 13.6 | Sn | 1,55 ± 0,1 | PVC | -10/+105 | Vercavi | HJ1X24----S0 | 1xAWG24 Style 1007/ 1569 |
3518-4 | 0,22 | 7 x Ø 0,20 ± 0,006 | 8-9 | Sn | 1,30 ± 0,05 | FEP | 200 | Rishun | RS201408030 | UL AWM 1332 AWG24 |
3518-4 | 0,22 | 7 x 0,202 mm | 9 | - | 1,2 ± 0,05 | PVC | -40/+105 | Leoni | 83000002Q | LiYYW 2x0,22 BL |
3518-4 | 0,22 | 7 x 0,203 mm | 23 | Sn | 1,2 ± 0,05 | PVC | -30/+80 | Medi | 613240411 | UL/ cUL LiYY 4 x AWG24 grau |
3518-4 | 0,22 | 7 x 0,20 mm ribbon cable | < 18 | Sn | 1,35 ± 0,05 | PVC | -30/+105 | Klasing | 2,5 FL-LiYV 7 x 0,22 mm² ZG, STL 902 06 | 7 x 0,22 mm², grau |
3518-4 | 0,22 | 7 x 0,203 mm | 18 | Sn | 1,5 ± 0,1 | PVC | -5/+80 | Helukabel | 620xx | LiY 1 x AWG24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | ≤ 13 | Sn | 1.25 | PVC | -40/+80 | Sterner | 1000000513 | KS-LiYY 7x0,22qmm |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 11 | Sn | 1,45 ± 0,05 | PVC | -25/+105 | KBE | 4100242110200K | AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,2 mm ± 0,005 | 10 ± 3 | - | 1,20 ± 0,1 | FEP | 180 | Mysun | VDE8207 | 24 AWG |
3518-4 | 0,22 | 11 x Ø 0,16 mm | 10.3 | Sn | 1.42 | PVC | 80 | Sumitomo | E41105 | UL 1007 AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 7–9 | - | 1,15 ± 0,05 | TPE | -40/+125 | Leoni | 88260330# | LI31Y 1x0,22 BL SKT 1,15 |
3518-4 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 1,43 ± 0,05 | PVC | 80 | LTK | E14800 | UL 1007 AWG 24 |
3518-4 | 0,22 | 11 x Ø 0,16 mm | 18 | - | 1,45 ± 0,05 | PVC | 105 | Guru Amardass | UL 1569#24 | UL 1569 AWG 19/ 24 |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 9 | - | 1,15 ± 0,05 | TPE | -30/+125 | Omerin | Q0507001 | PLASTHERM 41 0,22mm² |
3518-4 | 0,22 | 11 x Ø 0,16 mm ± 0,004 | 8,7 ± 0,87 | Sn | 1,45 ± 0,1 | PVC | 80 | Jiangsu Jiangyang | UL 1007 24AWG | AWM 1007 AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 16 ± 1,6 | - | 1,4 ± 0,05 | PVC | -5/+90 | Jiangsu Jiangyang | LiYW 0,22 mm² | LiYW 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,21 mm | 13 ± 2 | - | 1,3 ± 0,1 | PP | -25/+105 | KBE | 760022026001YJ | Li9YY 2x0,22 100 Ohm |
3518-4 | 0,22 | 7 x Ø 0,193 mm | 14–16 | - | 1,4 ± 0,05 | PVC | +90 | LZY | 8030170LZ | LiYW 1x0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm ± 0,008 | 8–12 | Sn | 1,20 ± 0,05 | SR-PVC | -10/+80 | Rishun | AWM 2464 E237675 VW-1SC 80°C 300V 24AWG RISHUN | UL 2464 AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 16 | Sn | 1.5 | PVC | -10/+105 | BizLink | 10.521.xxxV5310 | AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 11–17 | - | 1,38 ± 0,1 | PVC | -15/+70 | Gençler | 0,25 mm² | LiY 03V-K 0.25 mm² |
3518-4 | 0,23 | 7 x Ø 0,203 mm ribbon cable | 16 | Sn | 1,35 ± 0,05 | PVC | +105 | Klasing | 50253xx | FL-ZGL XXx0,23 1,35 R2,5 |
3518-4 | 0,23 | 7 x Ø 0,203 mm | ≤ 8,90 | Sn | 1.2 | SR-PVC | -10/+105 | Klasing | 6019430 | Y-J-UL 2517, 0,23mm² |
3518-4 | 0,23 | 7 x Ø 0,203 mm | ca. 7,7 | Ag | 1,26-1,42 | PTFE | -190/+150 | HEW | VE10503 | PTFE AWG 24/7, UL 1164 |
3518-4 | 0,23 | 7 x Ø 0,203 mm | 8.5 | Ag | 1,35 ± 0,05 | FP-PTFE | -190/+200 | Leoni | 13993 | Fp AWG 24 (7sp) |
3518-4 | 0,23 | 11 x Ø 0,16 mm ribbon cable | 16 | Sn | 1,4 ± 0,1 | PVC | 105 | LTK | SK-2651-202 | PVC-isolierte Flachbandleitung 24 AWG |
3518-4 | 0,23 | 7 x Ø 0,203 mm | < 8,9 | Sn | 1,50 ± 0,10 | PVC | -10/+80 | Medi | 120247xy | UL/ cUL 1007/ 1569 AWG 24 |
3518-4 | 0,23 | 7 x Ø 0,203 mm | 7,7 ± 0,77 | - | 1,26–1,41 | PTFE | -190/+200 | HEW | VE15757 | AWG 24 UL-Style 1180 |
3518-4 | 0,24 | 19 x Ø 0,127 mm | 7 ± 0,7 | Ni | 1,19 ± 0,08 | PTFE | -190/+250 | HEW | VE13951 | AWG 24 |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 24 | - | 1,3 | Special PVC | +80 | Helukabel | 18010 | LiYY 6x0,25QMM/ 18033 500V |
3518-4 | 0,25 | 7 x Ø 0,21 mm | 11,1 | - | 1,23 | PVC | +70 | Pirelli, Turkey | 79947 | 05V-K 0,25 300/500 V |
3518-4 | 0,25 | 14 x Ø 0,150 mm | 16,62 | - | 1,5 ± 0,05 | PVC | +105 | Arvo | 00440026 | LiYwYw 4 x 0,25 mm² |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 16,6 | - | 1,50 ± 0,1 | PVC | -30/+80 | Klasing | 6100022 | LiYY 4 x 0,25mm² |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 16,62 | - | 1,50 ± 0,08 | PVC | -5/+70 | Arvo | 0040004S | LiYY 4 x 0,25mm² |
3518-4 | 0,25 | 19 x Ø 0,127 mm | 8,2 | Ni | 1,16 ± 0,10 | PTFE | +260 | L. Jung | 0231 0090 - 20 | Tefloneinzelader/ AWG24/19 NPC 5Y |
3518-4 | 0,25 | 14 x Ø 0,15 | 12,4 | Sn | 1,55 ± 0,1 | Polyolefin copolymer | -55/+155 | Leoni-Studer | 190155 | BETAtherm 155 |
3518-4 | 0,25 | 7 x Ø 0,22 mm | 11 | Sn | 1,25 ± 0,10 | FEP | +180 | Omerin | D0108022 | Silifon E6YS 0,25mm² |
3518-4 | 0,25 | 32 x Ø 0,11 mm | - | 1,2 - 1,3 | PVC | -40/+105 | NKT | AP240502 | FLRY-B 0,25 mm² | |
3518-4 | 0,25 | 14 x Ø 0,15 | 16,62 | - | 1,30 ± 0,05 | PVC | -15/+70 | Arvo | 0040022P | LiYY 2 x 0,25mm² |
3518-4 | 0,25 | 14 x Ø 0,15 | 60 | - | 1,3 | PVC | -5/+70 | Bruns | 311002502 | LiYCY 2x0,25 |
3518-4 | 0,25 | 7 x Ø 0,22 mm | 11 ± 2 | Sn | 1.15 | FEP | -90/+180 | Omerin | Siliflon E6YS, 0,25mm² | 0,25mm² |
3518-4 | 0,25 | 7 x Ø 0,208 mm | 10 | - | 1,45 ± 0,03 | PVC | -5/+90 | Leoni | 8800001DA | LiYW 1x0,25SN |
3518-4 | 0,25 | 7 x Ø 0,208 mm | 10 | - | 1,45 ± 0,03 | PVC | -5/+70 | Leoni | 8800001CA | LiY 1x0,25 SN |
3518-4 | 0,25 | 7 x Ø 0,21 mm | 25 | - | 1,35 ± 0,05 | PVC | -10/+90 | IRCE | 41VI01000250087K-27K-J7K | S03V2-R 1 x 0,25 mm² |
3518-4 | 0,25 | 19 x Ø 0,13 mm | 9.5 | Sn | 1,45 ± 0,05 | Polyolefin | -55/+155 | Huber & Suhner | 12583896 - Red | RADOX 155 0,25 mm² |
3518-4 | 0,25 | 19 x Ø 0,13 mm | ≤ 10 | Sn | 1 | PFA | -90/+260 | Omerin | FT2109a | Siliflon EPFA |
3518-4 | 0,25 | 14 x Ø 0,15 mm | < 20 | Sn | 1,30 ± 0,1 | SR-PVC | -40/+80 | Suzhou Weimao | 108430000 | LiYY 8 x 0,25 mm² |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 25 | - | 1.3 | PVC | -5/+80 | Helukabel | 18035 | LiYY 8 x 0.25 |
3518-4 | 0,32 | 7 x Ø 0,24 mm | 18–22 | - | 1,42 ± 0,1 | PVC | +105 | Gençler | 2 x 0.35 mm² | 03V2V2-F 2 x 0,35 mm² |
3518-4 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3518-4 | 0,34 | 7 x Ø 0,25 | 14 | Sn | 1,2-1,45 | PVC | -40/+105 | Omerin | Q 0108 Indice A, Variante 05 | 0,34mm² AWG22 |
3518-4 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3518-4 | 0,34 | 7 x Ø 0,25 +/- 0,008 | 15 +/- 1,5 | - | 1,5 ± 0,05 | PVC | -40/+105 | Jiangyang | LiYY 2 x 0,34 mm² | 0,34mm² |
3518-4 | 0,34 | 7 x Ø 0,254 +/- 0,007 | 13-15 | - | 1,4-1,6 | PVC | -40/+105 | Rishun | LiYY 2 x 0,34mm² | 0,34mm² |
3518-4 | 0,34 | 7 x Ø 0,25 mm | ≤ 13 | Sn | 1,25 ± 0,05 | PVC | -25/+105 | Sterner | 061E000047 | KS-LiYv-T 1x0,34 qmm |
3518-4 | 0,34 | 7 x Ø AWG 30 | 44.2 | - | 1.27 | PVC | -20/+80 | Alphawire | 1174C | 22 AWG |
3518-4 | 0,34 | 7 x Ø 0,25 mm | 15 ± 3 | - | 1,50 ± 0,1 | PVC | -40/+105 | Epcos | P-046-CA-004 | LiYY 2 x 0,34 mm² |
3518-4 | 0,34 | 42 x Ø 0,10 mm | 11–18 | - | 1,5 ± 0,05 | TPE | -25/+80 | WenChang | 173585 | Li9Y11Y 5x0,34 mm² |
3518-4 | 0,34 | 42 x Ø 0,10 mm | 11–18 | - | 1,30 ± 0,05 | PP | -40/+80 | WenChang | TCA_GC-CC-1412 | Li9Y11Y 4x0,34 mm² |
3518-4 | 0,34 | 42 x Ø 0,10 mm ± 0,007 | 15 ± 3 | - | 1,30 ± 0,05 | PP | -40/+80 | Wenchang | Style 20549 | AWG 22 |
3518-4 | 0,34 | 17 x Ø 0,16 mm ± 0,008 | 18 ± 2 | Sn | 1,58 ± 0,05 | PVC | -40/+80 | BizLink Changzhou | 10.097.xxxYYYYY | UL 1007 AWG 22 |
3518-4 | 0,34 | 7 x Ø 0,25 mm | 14 ± 4 | Sn | 1.35 | FEP | -90/+205 | Omerin | D0108029 | SILIFLON E6YS 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,25 mm | 12 | - | 1,3 ± 0,05 | TPE | -30/+125 | Omerin | Q0507002 | Plastherm 41 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 8 | Sn | 1,40 ± 0,10 | XLPO | 120 | Başoğlu | Li32Y 0,34 mm² | Li32Y 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034066901ZN | Li31YYW 6 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 16 ± 2 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 730034036901ZN | Li31YYW 3 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034046901ZN | Li31YYW 4 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 23 | Sn | 1,3–1,5 | TPE-S | -40/+120 | Coficab | Li32YA0348080 | Li32Y Sn |
3518-4 | 0,34 | 7 x Ø 0,254 mm | 15 ± 1 | - | 1,50 ± 0,10 | PVC | -40/+105 | Hubei Jingwei | JW-2C034WLZ | 2 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,25 mm ± 0,1 | 22 ± 2 | - | 1,4 ± 0,10 | PVC | -40/+105 | Zenit | 11034T0000C140S1 | LiYW 0,34 mm² |
3518-4 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 8,3 | - | 1,45 ± 0,05 | PVC | +105 | Klasing | 5009484 | FL-ZGL 5 x 0,35/1,45 R5,00 |
3518-4 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3518-4 | 0,35 | 12 x Ø 0,21 mm | 16 | - | 1,4 +0/-0,2 | PVC | -40/+105 | Finolex | 911012312 | FLRY-B |
3518-4 | 0,35 | 7 x Ø 0,26 mm | 15 | - | 1,45 | PVC | +70 | Ege | 064401XX (70 °C) | |
3518-4 | 0,35 | 7 x Ø 0,26 mm | 15 | - | 1,45 | PVC | +90 | Ege | 064401XX (90 °C) | |
3518-4 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3518-4 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 1,58 +0,02/-0,03 | PVC | -25/+105 | KBE | 4100220100194K | UL 22 AWG AWM Stylle 1569 |
3518-4 | 0,35 | 12 x Ø 0,21 mm | - | 1,4 -0,2 | PP | -40/+125 | Leoni | 76860009K | Mocar 125 P 0.35-B | |
3518-4 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R10789 | |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11529 | |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11575 | |
3518-4 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35-1,90 | PVC | +105 | Deka | E50085 | H05V-K |
3518-4 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35 ± 1,90 | PVC | +105 | Deka | E50086 | H05V-K |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 16 ± 2 | Sn | 1,4 ± 0,1 | PVC | +5/+70 | Salcavi | X65275 | LiYCY |
3518-4 | 0,35 | 12 x max. Ø 0,21 mm | 28 | - | 1,30–1,50 | PVC | -30/+90 | Manex | LiYW 0,35 N | LiYW |
3518-4 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64240615B | L03VV-F 6x0,35 BL | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,1 | PVC TI 2 | -30/+60 | Leoni | 83013161A | S03VV-F 2x0,35/7 BL 4,4 SKT | |
3518-4 | 0,35 | 7 x Ø 0,25 mm | - | 1,2 - 1,3 | PP | -40/+125 | Coficab | 9YA00358000S | FLR9Y-A | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 32 | Sn | 1,6 ± 0,10 | XLPE | 150 | Baohing | C1307832 | AWG 22 |
3518-4 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3518-4 | 0,35 | 7 x Ø 0,26 mm | - | 1,25 - 1,40 | PVC | -40/+100 | Coficab | IRT200358000 | IRT2 | |
3518-4 | 0,35 | 45 x Ø 0,11 mm | - | 1,3 - 0,1 | TPE-S | -40/+125 | Gebauer & Griller | K4260 | FLR31Y 0,35 mm² | |
3518-4 | 0,35 | 12 x Ø 0,194 ± 0,006 mm | - | 1,4 ± 0,05 | PVC | -5/+70 | Jiangyang | LiY 0,35 | LiY 1x0,35 | |
3518-4 | 0,35 | 7 x Ø 0,25 mm | 27 | - | 1,25 ± 0,05 | PVC | -40/+105 | Coficab | YA00358000S | FLRY-A |
3518-4 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3518-4 | 0,35 | 12 x Ø 0,21 | 23 +/- 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YBSN0035 | FLRY-B 0,35sn |
3518-4 | 0,35 | 19 x Ø 0,16 | 10 | Sn | 1,25 ± 0,03 | FEP/FEP | -100/+180 | Coroplast | 18-1153 | LI6Y6Y 0,35mm² |
3518-4 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3518-4 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3518-4 | 0,35 | 7 x Ø 0,254 | 6,5 | Ag | 1,30 ± 0,10 | PTFE | -190/+200 | Leoni | 26168 | Fp AWG22(7sp) 600V |
3518-4 | 0,35 | 12 x Ø 0,193 | 16,8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22----S1 | AWG22 |
3518-4 | 0,35 | 7 x Ø 0,245 | 17 +/- 1,7 | Sn | 1,4 ± 0,05 | PVC | -15/+70 | Vercavi | HP 1035----S5 | FR2 1 x 0,35mm² |
3518-4 | 0,35 | 7 x Ø 0,26 | 20,4 | - | 1,25 ± 0,05 | PE | -40/+150 | Acome | T6510 A4F LH A 0.35mm² | 0,35 mm² (AWG22) |
3518-4 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 ± 0,05 | PVC | -40/+105 | Leoni | 83000002_ | LiYYW _ x 0,35 BL |
3518-4 | 0,35 | 11 x 0,21 mm | 42 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+105 | C.E.Cam. | HT035145 | 1x0,35mm² |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 8,5 ± 0,85 | Ag | 1,3 ± 0,1 | TE-100 | -190/+200 | HEW | 3607 | PTFE Litze AWG 22 |
3518-4 | 0,35 | 17 x Ø 0,16 mm | ≤ 18 | Sn | 1,58 ± 0,10 | PVC | 105 | Xingda | 156922BC | AWG 22 |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 140 ± 15 | - | 1.55 | PVC | 105 | Salcavi | X40349 | LiYYW 4x0,35 |
3518-4 | 0,35 | 7 x Ø 0,243 mm | 20 ± 2 | Sn | 1,45 ± 0,05 | PVC | -20/+90 | Salcavi | R1xxxx | FR7 S 1 x 0,35mm² |
3518-4 | 0,35 | 7 x Ø 0,245 mm | 13 | Sn | 1,30 ± 0,05 | PVC | -30/+80 | Medi | 122227 | AWG 22 |
3518-4 | 0,35 | 11 x Ø 0,20 mm ± 0,005 | 14 ± 2,8 | Sn | 1.6 | PVC | 105 | Başoğlu | BC-PVC AWG 22 | UL 1569, AWG 22 |
3518-4 | 0,35 | 7 x Ø 0,25 mm | 15 | Sn | 1,35 ± 0,05 | PFA | -90/+260 | Sipro | SiPFA 0,35 mm² CUSN | SiPFA |
3518-4 | 0,35 | 7 x Ø 0,236 mm | 19 | - | 1.45 | PVC | ≤ +70 | Deka | 2050110313 | LiY/ H05V-K 0,35 mm² |
3518-4 | 0,35 | 12 x Ø 0,194 mm | 15 | Sn | 1,57 ± 0,05 | PVC | -40/+105 | KBE | 4100224010194K | AWG 22 UL/ AWM-Style 1569/ 1007 |
3518-4 | 0,35 | 7 x Ø 0,26 mm | 15 ± 2 | - | 1,50 ± 0,1 | PVC | -40/+105 | C.E.CAM. | V2035150PC | S03V2-R 1 x 0,35 mm² |
3518-4 | 0,36 | 12 x Ø 0,194 mm | 15 | - | 1,40 ± 0,05 | PVC | -5/+70 | Leoni | 88200132Z | LiY 1 x 0,38 mm² BL |
3518-4 | 0,36 | 12 x Ø 0,194 mm | 15 ± 1,5 | - | 1,58 ± 0,02 | PVC | -10/+105 | Leoni | 89170840A | LiYW 1 x 0,38 mm² BL (AWG 22/ 12) |
3518-4 | 0,36 | 7 x Ø 0,254 mm | 15 | Sn | 1,65 ± 0,10 | PVC | -10/+80 | Medi | 120227xy | UL/ cUL 1007/ 1569 AWG 22 |
3518-4 | 0,36 | 7 x Ø 0,254 mm | 8.5 | Ag | 1,17–1,37 | PTFE | -190/+105 | HEW | 45407 | AWG 22 |
3518-4 | 0,36 | 12 x Ø 0,194 mm | 15 ± 1,5 | - | 1,40 ± 0,05 | PVC | -15/+70 | Gençler | 27101010922 | 03V-K 1 x 0,38 mm² |
3518-4 | 0,36 | 12 x Ø 0,194 mm | 15 ± 1,5 | - | 1,40 ± 0,05 | PVC | +90 | Gençler | 27102010922 | 03V2-K 1 x 0,38 mm² |
3518-4 | 0,36 | 7 x Ø 0,254 mm | 10 +/-1 | Sn | 1,52 ± 0,05 | PVC | -40/+105 | Hubei Jingwei | JW-265122W | UL 2651 AWG 22 2C |
3518-4 | 0,38 | 19 x Ø 0,16 mm | 8,4 | Sn | 1,911,99 | TE-302 | +150 | HEW | 36247 | HEW-FEP-Aderleitung |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,35 + 0,1 | PVC | +105 | Cablena | 40002 | LiY 0,38 mm2 |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 16,5 | - | 1,6 ± 0,2 | PVC lead-free | +105 | Gebauer & Griller | 78303 | FLY 0,38-B |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 21/21,6 | - | 1,4 ± 0,05 | VPE | +110 | Kromberg & Schubert | 352118 | FLR2X 0,38 mm²-B |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 16 | - | 1,60 ± 0,20 | PVC lead-free | +110 | KBE | 1800380000195C | FLYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 | - | 1,40 ± 0,05 | PVC | -15/+70 | KBE | 5000380120198E | LiY 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,40 ± 0,05 | PVC | -15/+90 | KBE | 5000380120198T | LiYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,1 | PVC | +90 | KWL | 605103.96 | LiYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC lead-free | +105 | Leoni, Poland | 88200130M | LiYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,20 mm | 27 | - | 1,4 ± 0,1 | PVC lead-free | +70 | Leoni | 88730855A | LIY 1x0,38 BL 70°C |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | Sn | 1,58 + 0,02/-0,03 | PVC lead-free | +105 | Leoni, Mexico | 89170842A | LIYW 0,38 Sn AWG 22/12 UL1569 CSA T1 |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 24 ± 2,4 | - | 1,4 ± 0,05 | XLPE | +5/+120 | Leoni | 89300020A | LI2X 1x0,38BL |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+105 | Leoni | 88200130 | LIYW |
3518-4 | 0,38 | 7 x Ø 0,254 mm | 10–18 | Sn | 1,55 ± 0,05 | PVC | +80 | Baohing | ULSBH-254T/3-MZ-A | AWG 22 |
3518-4 | 0,38 | 12 x Ø 0,21 | 24 | - | 1,4 ± 0,05 | XLPE | -30/+125 | Leoni | 89300020 | Li2X 1x0,38 |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 10 % | - | 1,40 ± 0,05 | PVC | -40/+70 | Cablena | 2336 | LIY 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,203 mm | 14,4 ± 10 % | Sn | 1,35 ± 0,05 | TETE-302 | -100/+180 | HEW | 23069 | TETE 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,20 mm | 24,3 | - | 1,35-1,45 | PVC | -30/+90 | Leoni | 88730856# | LIYW 1x0,38 |
3518-4 | 0,38 | 19 x Ø 0,161 mm | ca. 8,4 | Ag | 1.3 | PTFE | -190/+200 | HEW | VE14182 | HEW-PTFE 2xAWG 22 |
3518-4 | 0,38 | 12 x Ø 0,20 mm | 15 ± 1,5 | - | 1,45 ± 0,15 | PVC | -40/+70 | Cablena | 8268 | 2x0,38 mm² LiYY |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+105 | BizLink Changzhou | 20.0379.xxxYYYYY | LiYW 0,38 |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -5/+70 | BizLink | 200378 | LiY 0,38 |
3518-4 | 0,38 | 7 x Ø 0,254 mm | 16 ± 4,8 | Sn | 1,3 ± 0,05 | PVC | -10/+105 | Klasing | 6004278 | AWG 22 UL AWM Style 2517 |
3518-4 | 0,38 | 12 x Ø 0,2 mm | 15 ± 1,5 | - | 1,45 ± 0,15 | PVC | -15/+105 | Cablena | 63.202.001.A | SLiYY 2 x 0,38 |
3518-4 | 0,38 | 12 x Ø 0,196 mm ± 0,006 | 15 ± 1,5 | - | 1,40 ± 0,05 | PVC | +70 | Baohing | G73 | LiY 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,193 mm | 16–19 | - | 1,45 ± 0,1 | PVC | +70 | LZY | 8030157LZ | LiY 1 x 0,38 mm² |
3518-4 | 0,56 | 7 x Ø 0,33 mm | 15.4 | Ni | 1,69 ± 0,07 | PTFE | -40/+200 | Leoni | 8900001DA... | LI5Y AWG20/7 0,320NI |
批准的电线,用于 3518-4 S01
导体 | 绝缘 | 制造商 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | 截面积 (mm²) |
结构 | 绞距 (mm) |
表面处理 | 直径 (mm) |
材料 | 温度范围 (°C) |
名称 | 名称 | 描述 |
3518-4 S01 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3518-4 S01 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 S01 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3518-4 S01 | 0,22 | 11 x Ø 0,16 mm | 1113 | Sn | 1,43 | PVC | +80 | Xingda | 1007-24# | AWM E187208 XDXLGS 1007 VW-1 AWG 80°C |
3518-4 S01 | 0,22 | 7 x Ø 0,20 mm | 1517 | Sn | 1,50 ± 0,15 | PVC lead-free | +80 | Rishun | 10072401001-093 | PVC-Litze AWG 24 |
3518-4 S01 | 0,22 | 11 x Ø 0,16 mm | 1517 | Sn | 1,50 ± 0,15 | PVC lead-free | +80 | Rishun | 10072401002-093 | PVC bleifrei |
3518-4 S01 | 0,22 | 7 x Ø 0,193 mm | 8 ± 2 | Sn | 1,5 | Silicone | -60/+180 | Elettrobrescia | 31910223G BI009 | Silicone 0,22 mm² |
3518-4 S01 | 0,22 | 7 x 0,203 mm | 18 | Sn | 1,5 ± 0,1 | PVC | -5/+80 | Helukabel | 620xx | LiY 1 x AWG24 |
3518-4 S01 | 0,22 | 7 x Ø 0,21 mm | 8 | - | 1,45 ± 0,1 | Silicone | -60/+180 | Elettro Brescia | IDC-SIL 0,22 mm² | SIL 0,22 mm² |
3518-4 S01 | 0,23 | 7 x Ø 0,203 mm | ≤ 9 | Sn | 1.5 | PVC | -30/+105 | Klasing | 6047507 | Y - UL 2517, AWG 24 |
3518-4 S01 | 0,23 | 7 x Ø 0,203 mm | 7,7 ± 0,77 | Cu Ag | 1,26-1,41 | PTFE | -190/+200 | HEW CDT | 17851 | AWG 24 UL 1180 |
3518-4 S01 | 0,24 | 19 x Ø 0,127 mm | 25 ± 3 | - | 1,03 ± 0,05 | FEP | -5/+150 | Leoni | LHTS: 39969 | Li6YB2G 2x0,24 BL (AWG24-19) |
3518-4 S01 | 0,24 | 19 x Ø 0,133 mm | 8 ± 1 | - | 1,15 ± 0,05 | FEP | -5/+150 | KBE | 660024026000GX | Li6Y 2x0,24 120 Ohm |
3518-4 S01 | 0,25 | 19 x Ø 0,12 ± 0,005 mm | 11 ± 2 | Sn | 1,55 ± 0,05 | FEP | +200 | Shenjiang | SJSPRD817 | AWG 24 UL 1332 |
3518-4 S01 | 0,33 | 7 x Ø 0,24 mm | 20 | Sn | 1.6 | PVC | -5/+80 | Helukabel | 62101 | AWG 22 Einzelader |
3518-4 S01 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 18 | Sn | 1,35 ± 0,1 | PTFE | +180 | HEW | 12653 | Te-Cu vz/ AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14,3 | - | 1,50 ± 0,05 | PVC plasticized | +70 | Arvo | 210006 | LIY 0,34 m2/7 |
3518-4 S01 | 0,34 | 7 x Ø 0,254 mm | 12 | Sn | 1,5 + 0,02 | Polyolefin | +125 | Nexans | 449169 | EPX125 FR 22/7 AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12,7 | - | 1,6 | PVC | +105 | Cable Tech | 702895 | AWG 22/ UL 1569/1007 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | Sn | 1,6 ± 0,05 | PVC | +80 | Coroplast | 1498500 | LiYV 0,34 mm²/AWG 22 | |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | Sn | 1,6 ± 0,05 | PVC | +80 | Coroplast | 10-6002 | PVC-Aderleitung UR AWM 1007/CSA TR-64 22 AWG | |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 18 | Sn | 1,6 ± 0,01 | PVC | +150 | Coroplast | 10-7212 | LiYV 0,35 mm²/AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 24 | Sn | 1,38 ± 0,05 | PVC | +105 | Gençler | 312710321521 | G05V2-K 0,35mm2 |
3518-4 S01 | 0,34 | 7 x Ø 0,243 mm | 19,05 | Sn | 1,5 ± 0,08 | PVC | +105 | Copperfield | 22021- | 22 7/.0096 TC AWM 1569 or 1007 TR64 or AWM I A/B |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | ≤ 20 | Sn | 1,65 ± 0,10 | PVC | +105 | Flamar | 31A22ST01-XXX | PVC isolierte flexible Ltg |
3518-4 S01 | 0,34 | 7 x Ø 0,254 mm | 10,5 | Sn | 1,60 ± 0,05 | PVC lead-free | +105 | KBE | 4100220410245K | UL22AWG AWM Style 1569 |
3518-4 S01 | 0,34 | 7 x Ø 0,254 mm | 18 | Sn | 1,25 ± 0,05 | PVC | +105 | Leoni | 76753011W | FLRY 0,35 SN-A |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1,4 ± 0,1 | TPE | +120 | Coroplast | 8-0284 | LI31Y 0,34mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 12 | Sn | 1,35 ± 0,01 | PVC | +105 | Leoni | 88030761M | LiYW 0,35 mm² vz/SKT |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 10 | Sn | 1,40 ± 0,10 | Silicone | +180 | Coroplast | 9-1130 (VM 9-1125) | LI2G 0,34 mm²/ Shore Härte A80 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 25 | - | 1,5 ± 0,1 | PVC | +80 | Epcos | C61063-A2902-C051 | LIYY 2X0,34mm2 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 15 | - | 1,5 ± 0,1 | PVC | +80 | Epcos | C61063-A2902-C061 | LIYY 2X0,34mm2 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14,3 | Sn | 1,6 ± 0,1 | PVC | +105 | Medi | E194781 | UL/CSA Style 1007/1569 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12 | Sn | 1,6 ± 0,1 | PVC | +105 | Medi | E34722 | UL/CSA Style 1007/1569 |
3518-4 S01 | 0,34 | 7 x Ø 0,255 mm | 18 | - | 1,25 ± 0,1 | PVC | +70 | Kablo Elektro | MY 47003402 | LiYY 2X0,34mm2 |
3518-4 S01 | 0,34 | 17 x Ø 0,16 mm | 17 | Sn | 1,5 ± 0,1 | PVC | +80 | Tongyuan | SP-H03VVH2-F/0.34-002 | H03VVH2-F/ 2X0,34mm² |
3518-4 S01 | 0,34 | 17 x Ø 0,16 mm | 20 | Sn | 1,45 ± 0,05 | PVC | +80 | Pan | UL 1095 Hook-Up Wire | UL 1095 AWG 22 STR 17/0,160 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 24 | Sn | 1,38 ± 0,05 | PVC | +105 | Gençler | 312710321520 | G05V2-K 0,35mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3518-4 S01 | 0,34 | 7 x | ≤ 113 | - | 1,5 | PVC | -5/+70 | Lapp | 28404 | Unitronic LiYY 4 x 0,34 |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | - | 1,40 ± 0,10 | TPE SEBS 55 D | -40/+120 | KBE | 1500340110250S | LI 32Y 0,34 mm² |
3518-4 S01 | 0,34 | 7 x 0,254 mm | 21 | Sn | 1,6 +/- 0,1 | PVC | -5/+80 | Helukabel | 621xx | LiY 1 x 22AWG |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 70 | - | 1,50 ± 0,05 | PVC | 70 | Leoni | 83A00034A | LIYY 2x 0,34 bl |
3518-4 S01 | 0,34 | 17 x Ø 0,16 mm | 10 | Sn | 1,60 ± 0,08 | XLPE | -40/+150 | Leoni | 3398-22-017 | AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12–18 | - | 1,5 ± 0,07 | PVC | -40/+105 | Tri Wire | C61063A2902C090 | LiYY 2 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12–18 | - | 1,5 ± 0,07 | PVC | -40/+105 | Tri Wire | C61063A2902C093 | LiYY 2 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 8 | Sn | 1,40 ± 0,10 | XLPO | 120 | Başoğlu | Li32Y 0,34 mm² | Li32Y 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034066901ZN | Li31YYW 6 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,35 ± 0,05 | PVC | -15/+90 | KBE | 730034026901AJ | LiYWYW 2 x 0,34 mm² |
3518-4 S01 | 0,34 | 19 x Ø 0,15 mm | 18 ± 3 | Sn | 1,50 ± 0,05 | PVC | -20/+105 | Salcavi | X42650 | AWM Style 1569/ 1007 I A/B AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 16 ± 2 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 730034036901ZN | Li31YYW 3 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034046901ZN | Li31YYW 4 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 16 ± 2 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 730034036901ZN | Li31YYW 3 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 60 ± 5 | Sn | 1,3–1,5 | TPE-S | -40/+125 | Coficab | 220333034xxx | Li31YYW sn 3 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 23 ± 3 | Sn | 1,10–1,20 | FEP | -40/+200 | Coficab | BU6YSN034xxyy | FLU6Y Sn TC 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 23 | Sn | 1,3–1,5 | TPE-S | -40/+120 | Coficab | Li32YA0348080 | Li32Y Sn |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1.15 | FEP | -90/+205 | Omerin | D0102035 | EFEP 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1.6 | PVC | -30/+105 | Omerin | Q1209025 | UL 1569 AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm ± 0,1 | 22 ± 2 | - | 1,40 ± 0,10 | PVC | -40/+105 | Zenit | 11034T0000C140S2 | LiYW 0,34 mm² HT 105°C |
3518-4 S01 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,30 + 0,1 | PVC lead-free | +105 | Leoni | 66500 | FLRY-B (Sn) |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 14,4 | - | 1,5 | PVC lead-free | +70 | Leoni, Turkey | 68436 | LiY 0,35 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 14,4 | - | 1,5 | PVC lead-free | +90 | Leoni, Turkey | 68440 | LiYW 0,35 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 13,3 | Sn | 1,35 | PVC | +70 | Pirelli, Turkey | 79716 | 05V-K (Sn) 0,35 300/500 V |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 13,3 | Sn | 1,35 | PVC | +105 | Pirelli, Turkey | 84111 | FLRY (Sn) 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 18 | Sn | 1,25 ± 0,1 | PVC | +105 | Coroplast | 1-5010 | LIYW 0,35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 8,3 | - | 1,45 ± 0,05 | PVC | +105 | Klasing | 5009484 | FL-ZGL 5 x 0,35/1,45 R5,00 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 11,5 | - | 1,25 ± 0,05 | Polyolefin | +150 | Huber + Suhner | 12567923 | Radox 155S RW |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 8,5 | Sn | 1,40 ± 0,10 | TPE-S | +125 | Leoni | 88260310 | LI31Y 0,35/7/ 1,4 MM SN |
3518-4 S01 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3518-4 S01 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 7,8 | Sn | 1,60 ± 0,10 | Special PVC | +105 | Medi | 120227 | UL Schaltlitze AWG 22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 9,53 | Sn | 1,6 | PVC | +105 | Champlain | 1430 / 22107 | 22 7TC 105C 300V 1430 016 XLPVC CSA REW |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +260 | Omerin | 150.15.01.00K | PFA 1x0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PTFE | +180 | Cet | 150.15.01.00R | PTFE 1X0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +180 | Cet | 150.15.01.00T | PFA 1x0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-035 | 05V-K 0.35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +90 | Prysmian, Turkey | 2006-VS-90-035 | 05V2-K 0.35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,04 | PTFE | +200 | Habia | 404-21033-040 | PTFE 0.35 Z |
3518-4 S01 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 ± 0,10 | PVC lead-free | +105 | Coroplast | 6-0111 | FLRY 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 18 | Sn | 1,35 ± 0,1 | PVC | +60 | Leoni | 64210515A | L03VV-F 4X0,35/7 BL SKT |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 11 | Sn | 1,57+ 0,1/- 0,05 | PVC | +105 | Quinro | 7-208 | |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | Sn | 1,35 ± 0,05 | PVC | +60 | Leoni | 83013160A | S03VV-F2X0,35/ 7SN4,4SKT |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 10 | Sn | 1,35 ± 0,05 | PVC | +105 | Leoni | 88030761K | LiYW 1x0,35/ 7/1,35 Sn 105C |
3518-4 S01 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 10 | Sn | 1,55 ± 0,1 | PVC lead-free | +105 | Leoni | 89460100A | LIYW -AWG22- UL1569-R100 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 30 | Sn | 1,4 ± 0,05 | PVC | +70 | Italian Cable | CA240002F300 | CABLE 1X0,35/ 7X0,25 tinned |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 8,4 | Sn | 1,5 | FEP | +150 | Radix | FBA22T007 | FBA AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 17 | Sn | 1,25 | PVC | +90 | Nexans | FK 90 0,35 TINNED | H05V2-R 0,35 VZ (YJ6) |
3518-4 S01 | 0,35 | 7 x Ø 0,255 mm | 20 | Sn | 1,6 ± 0,05 | PVC | +90 | Pan | H10077S22 | UL 1007 AWG 22/ STR 7x0,255 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 20 | Sn | 1,45 ± 0,05 | PVC | +80 | Pan | H10957S22 | UL 1095 AWG 22/ STR 7x0,254 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 16 | - | 1,35 ± 0,10 | PVC | +105 | Nursan | K04JG0 | 0,35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | Sn | 1,35 ± 0,05 | PTFE | +280 | Yapitas | Y26.0.0725.14 | FLON Li51Y |
3518-4 S01 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35-1,90 | PVC | +105 | Deka | E50085 | H05V-K |
3518-4 S01 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35 ± 1,90 | PVC | +105 | Deka | E50086 | H05V-K |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 13 | Sn | 1,25 ± 0,05 | PVC | -40/+105 | Tele-Fonika | G-022076 | FLRY-A |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 10 ± 2 | Sn | 1,05 ± 0,05 | PFA | -190/+260 | Salcavi | XF0547 | FR5P AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 17,78 | Sn | 1,6 | PVC | +105 | Baohing | C0303020 | UL 1569 22AWG |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | LHL 24" | Sn | 1,551,65 | PVC | +105 | Hubei Aerospace | CASC-10052517 | 1569 22AWG |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | Sn | 1,55 ± 0,05 | PVC | +80 | Lonsid | 100722002-11 | AWG 22 | |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 26 | - | 1,3 ± 0,10 | PVC | 90 | Baohing | C1112828 | FB S03V2-R |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 12-26 | - | 1,5 ± 0,10 | PVC | 70 | Baohing | SWE-FBBH-169-H4WY | H05V-K 0,35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | - | 1,5 ± 0,1 | PVC | +90 | Baohing | FBSBH -204/3-SWR | H05V2-K 0,35mm² | |
3518-4 S01 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,35 +0,1/-0,05 | PVC | -10/+105 | Vercavi | HH1035----SF | FR 3/2 1 x 0.35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3518-4 S01 | 0,35 | 45 x Ø 0,1 mm4 conductors | - | 1,4 ± 0,05 | PVC YI 1 | -20/+80 | Leoni | 83200510# | LIFYY 4x0,35 BL 4,6mm | |
3518-4 S01 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 | 15,2 | - | 1,65 ± 0,10 | PVC | -10/+105 | Klasing | 6016045 | 2xAWG22 UL-Style 2517/ 1569 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 11 | Sn | 1,35 ± 0,05 | FEP | -55/+150 | Leoni | 89A00019 | LI6Y6Y 1x0,35 SN AWG22 |
3518-4 S01 | 0,35 | 7 x 0,243 mm | 20 ± 2 | Sn | 1,45 ± 0,05 | PVC | -20/+90 | Salcavi | R13636 | FR7 S 1 x 0,35 mm² |
3518-4 S01 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 ± 0,05 | PVC | -40/+105 | Leoni | 83000002_ | LiYYW _ x 0,35 BL |
3518-4 S01 | 0,35 | 7 x 0,241 mm | 15 | Sn | 1,35 ± 0,05 | PVC | 70 | Prysmian | 20149750 | LiY Sn 1 x 0,35mm² |
3518-4 S01 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 +/- 0,05 | PVC | -40/+105 | Leoni | 83000002N | LiYYW 2x0,35 BL |
3518-4 S01 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 +/- 0,05 | PVC | -40/+105 | Leoni | 83000002P | LiYYW 4x0,35 BL |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 30 | Sn | 1,35 ± 0,05 | PFA | -90/+260 | Yapitas | 8231 | FLON PFA-VDE |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,40 ± 0,10 | PVC | -40/+70 | Cablena | 40.070.XXX | LiY 0,35-A Sn |
3518-4 S01 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3518-4 S01 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2 | Sn | 1,40 ± 0,20 | PVC | -5/+70 | Tele-Fonika | TT1-7266v3 | LiYc 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 15 | Sn | 1,35 ± 0,05 | PFA | -90/+260 | Sipro | SiPFA 0,35 mm² CUSN | SiPFA |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 15 ± 3 | - | 1,45 ± 0,1 | PVC | -40/+70 | Cablena | 40.028.300.2 | LiY 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 23 ± 3 | - | 1,3 -0,1 | PVC | -40/+105 | Coficab | YA0035xxyy | FLRY-A |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 12 | Sn | 1,35 ± 0,05 | PVC | -40/+105 | Sipro | FRY-A, 0,35 mm² CUSN 105°C | FLRY-A |
3518-4 S01 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3518-4 S01 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 | - | 1,40 ± 0,05 | PVC | -15/+70 | KBE | 5000380120198E | LiY 0,38 mm² |
3518-4 S01 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,4 ± 0,1 | PVC | +160 | Leoni | 88030850A | LIY 0,38 mm² |
3518-4 S01 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,5 ± 0,1 | PVC lead-free | +105 | Leoni | 88730872A | LIYW 1 x 0,38/0,2-S SN SKT |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 24 ± 2,4 | - | 1,4 ± 0,05 | XLPE | +5/+120 | Leoni | 89300020A | LI2X 1x0,38BL |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+70 | BizLink Changzhou | 20.0378.xxxYYYYY | LiY 0,38 |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+105 | BizLink Changzhou | 20.0379.xxxYYYYY | LiYW 0,38 |
3518-4 S01 | 0,45 | 45 x Ø 0,10 mm | 21,6 | Sn | 1,55 + 0,10 | PVC | +105 | Leoni | 89170499A | LIFYW 0,35/0,1 SN AWG 22 |
批准的电线,用于 3518-4 S02
导体 | 绝缘 | 制造商 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | 截面积 (mm²) |
结构 | 绞距 (mm) |
表面处理 | 直径 (mm) |
材料 | 温度范围 (°C) |
名称 | 名称 | 描述 |
3518-4 S02 | 0,13 | 7 x Ø 0,16 | LHL 8" | Ag | 1,05-1,12 | FEP | +200 | Worldful | AF200 0.13-600 | AWG26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm ribbon cable | 8 | Sn | 1,00 ± 0,05 | PVC | -10/+80 | Medi | 122267 | UL/cUL Style 1061/10002 AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 7,4 | Sn | 0,95 | PVC lead-free | +80 | Hitachi | SP23-90742 | Semi-rigid PVC insulated wire, 1061 AWM LF, AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 9,6 | Sn | 1,3 | PVC lead-free | +80 (UL)/+90 (CSA) | Hitachi | SPE-00-1024 | UL1007-LF 26 AWG |
3518-4 S02 | 0,14 | 7 x 0,16 mm ribbon cable | 7.6 | Sn | 1,35 ± 0,05 | PVC | -20/+105 | JST | JFCR26L-06G250-036 | FastCon AWG 26 |
3518-4 S02 | 0,14 | 7 x 0,16 mm ribbon cable | 7.6 | Sn | 1,35 ± 0,05 | PVC | -30/+105 | Klasing | 5025206 | AWG 26 Style 2651 |
3518-4 S02 | 0,14 | 7 x 0,16 mm | 11-13 | Sn | 1,3 ± 0,08 | XLPE | 150 | Belden | B3398-607 | AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 | 7,8-9,5 | Sn | 1,08 | PET | +125 | Sumitomo | UL 3265-B28 AWG26 (7/ 0,16) | AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 36.3 | Sn | 1,02 ± 0,05 | PVC | -40/+105 | Kabeltronik | 95042609 | LiYY 4 x AWG 26/7 |
3518-4 S02 | 0,14 | 7 x Ø 0,158 mm | 12 | - | 1,05 -0,10 | PVC | -40/+105 | Leoni | 76693401# | FLCUAG01RY 0,13-A |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | Sn | 1.3 | XL-PE | LTK | - | AWG 26 | ||
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 11–13 | Sn | 1 | NHFR | 105 | LTK | E148000 | UL10368 - 26AWG |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 12 | Sn | 1,3 ± 0,08 | PVC | +105 | LTK | SP-1569-021 | UL 1569 AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 ± 0,008 mm | 8–9,5 | Sn | 1,20 ± 0,05 | XLPE | 125 | Rishun | RS201702028 | XLPE 26#TS/2F AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 5–6 | Ag | 1,09 - 1,19 | FEP | -60/+200 | Rishun | UL1332 26AWG 200℃300V VW-1yellow、white | AWG 26 UL 1332 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 11–13 | Sn | 1,08 ± 0,05 | XLPE | -40/+150 | Rishun | UL4484 26AWG 150℃300V VW-1yellow | AWG 26 UL 4484 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 7–8 | Sn | 1,00 ± 0,05 | MDPP | -40/+125 | Tri Wire | S-046-CA-183 | 26 AWGX1C |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 7-8 | Sn | 1,00 ± 0,05 | XLPE | -40/+150 | Tri Wire | S-46-CA-185 | 26 AWGX1C |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 7–8 | Sn | 1,00 ± 0,05 | TPU | -40/+150 | Tri Wire | S-046-CA-184 | 26 AWGX1C |
3518-4 S02 | 0,16 | 19 x Ø 0,102 mm | 8 | Sn | 1 ± 0,05 | PVC | -10/+105 | Medi | 122269 | AWG 26 |
3518-4 S02 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 S02 | 0,22 | 11 x Ø 0,16 mm | 13–15 | Sn | 1,41 ± 0,1 | PVC | 105 | 3F | UL 1569240_-11 | AWG 24 |
3518-4 S02 | 0,24 | 19 x Ø 0,127 mm | 25 ± 3 | - | 1,03 ± 0,05 | FEP | -5/+150 | Leoni | LHTS: 39969 | Li6YB2G 2x0,24 BL (AWG24-19) |
3518-4 S02 | 0,24 | 19 x Ø 0,133 mm | 8 ± 1 | - | 1,15 ± 0,05 | FEP | -5/+150 | KBE | 660024026000GX | Li6Y 2x0,24 120 Ohm |
3518-4 S02 | AWG 24 | 1 x Ø 0,51 mm | - | Sn | PE | -40/+105 | Sumida | Fxx-Pxxx-002 | Panta-Fix Jumper | |
3518-4 S02 | AWG 26 | 7 x Ø 0,16 mm | 6–8 | Ni | 1,15 ± 0,10 | FEP | 200 | Qifurui | UL 1332 AWG 26 00-black/01-white | UL 1332 AWG 26 00-black/01 white |
批准的电线,用于 3518-4 S03
导体 | 绝缘 | 制造商 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | 截面积 (mm²) |
结构 | 绞距 (mm) |
表面处理 | 直径 (mm) |
材料 | 温度范围 (°C) |
名称 | 名称 | 描述 |
3518-4 S03 | 7 x Ø 0,244 mm | 18 | Sn | 1,50–1,64 | PVC | -40/105 | Coficab | 1569SN22007xy | UL 1569 | |
3518-4 S03 | 0,14 | 7 x Ø 0,16 mm | 6 ± 0,5 | Sn | 1.25 | Silicone | -50/+180 | Leoni Silitherm | ST0101§ | SIF AWG 26 (0,14) |
3518-4 S03 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3518-4 S03 | 0,17 | 7 x Ø 0,18 | 12 | - | 1,05 ± 0,05 | PVC | -40/+70 | Leoni | 88A00216# | LiY 1x0,17 BL CuAg |
3518-4 S03 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 S03 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3518-4 S03 | 0,22 | 19 x Ø 0,13 | < 17 | Sn | 1,45 ± 0,1 | PVC | -30/+105 | Amokabel | 1608 | AWG 24 UL1569 FT Slits |
3518-4 S03 | 0,22 | 19 x Ø 0,127 mm | 7 | Sn | 0,96 | PTFE | +180 | HEW | 18880 | HEW-PTFE/ Silikonltg./ TEHSI-Cu vn 2xAWG24 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 15 | Sn | 1,5 ± 0,05 | PVC | +105 (UL)/+80 (CSA)/+90 | Medi | 120247 ... | |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 ± 0,1 | PVC | +105 | Leoni | 76783002K | FLRY 0,22 -A |
3518-4 S03 | 0,22 | 12 x Ø 0,1 mm | 18 | Sn | 1,25 ± 0,10 | PVC | +80 | Leoni | 83200505A | LiYY 6X0,22/ 0,1/4,8 BL |
3518-4 S03 | 0,22 | 19 x Ø 0,127 mm | 15 | Sn | 1,45 ± 0,05 | PVC | +105 | Leoni | 89170475M | LiYW 0,22SNAWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 9,4 | Sn | 1,40 | PVC | +105 | Viakon | OW 76 | 24 AWG AWM Style 1007/1569 105C |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 14/16 | Sn | 1,43 ± 0,05 | PVC | +105 | LTK | SK-1569-025 | AWM Style 1569 24 AWG |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 1,45 ± 0,05 | PVC | +90 | Pan | UL 1007 24# STR 11/0.160X1C | UL 1007 AWG 24 STR 11/1,160 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 8 | Sn | 1,30 ± 0,10 | FEP | +180 | Rei Hsing | UL1332 24 AWG | UL1332 Teflon Wire AWG 24 300V |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 0,330,38 | PVC | +105 | Eleteck | 0190082-A | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,1 -1,2 | PVC | -40/+105 | Leoni | 76783002# | FLRY 0,22-A |
3518-4 S03 | 0,22 | 7 x Ø 0,21 | 9 | Sn | 1,4 ± 0,10 | PVC | -40/+105 | Leoni | 89460080# | LiYW 0,22 SN AWG 24/ 7 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 14–16 | - | 1,15 ± 0,05 | PVC | -40/+105 | Suzhou Cableplus | FLRY-A 0,22mm² | 0,22mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 ± 0,006 | 8-9 | Sn | 1,30 ± 0,05 | FEP | 200 | Rishun | RS201408030 | UL AWM 1332 AWG24 |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm ± 0,006 | 18 | Sn | 1,40 ± 0,08 | PVC | 80 | Zhengwei | BXBA2498 | AWG 24 |
3518-4 S03 | 0,22 | 7 x 0,21 mm | 27 | - | 1,10 - 1,20 | PP | -40/+125 | Coficab | 9YA00228000S | FLR9Y-A, 0,22mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 10 | - | ≤ 1,2 | PVC | -40/+100 | NKT | AP010002 | FLRY-A 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 9 ± 0,2 | Ni | 1,4 ± 0,1 | Silicone | -40/+180 | Leoni/Silitherm | AWM AWG24 Style 3367 | 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 9 ± 0,2 | Sn | 1,4 ± 0,1 | Silicone | -40/+180 | Leoni/Silitherm | SIF 0,22 mm² | 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 8 | Ni | 1,4 | Silicone | 180 | Omerin | 0,22 mm² | Silicable 0,22 mm² Style 3367 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | ≤ 13 | Sn | 1,25 ± 0,07 | PVC | -20/+70 | Sterner | 1000000511 | LiYY 3 x 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm ± 0,008 | 0,5" | Sn | 1,0 ± 0,05 | PVC | -30/+80 | LZY | SP-1571/24-001 | AWM 1571 24 AWG |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm ± 0,005 | 10 ± 3 | - | 1,20 ± 0,1 | FEP | 180 | Mysun | VDE8207 | 24 AWG |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 11 | Sn | 1,45 ± 0,05 | PVC | -25/+105 | KBE | 4100242110200K | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 16 | Sn | 1.5 | PVC | +105 | BizLink | 10.0785.xxxYYYYY | UL 1569 AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,193 mm | 13.6 | Sn | 1,55 ± 0,1 | PVC | -10/+105 | Vercavi | HJ1X24----S0 | 1xAWG24 Style 1007/ 1569 |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | ≤ 20 | - | 1,2 -0,1 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,22-A/T125 | FLR9Y 0,22-A |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 14–20 | Sn | 1,2 ± 0,10 | PVC | -40/+80 | Cable-Net | UL2464 2C*24# 4.0MM WHE | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 12 ± 2 | Sn | 1,2 ± 0,05 | FEP | -50/+200 | Yangtai | 02305017-TC | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 15 ± 1,5 | - | 1,25–1,35 | PVC | ≤ 70 | Jiangsu Jiangyang | LiY 1 x 0,25 mm² | LiY 1 x 0,25 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 16 ± 1,6 | - | 1,4 ± 0,05 | PVC | -5/+90 | Jiangsu Jiangyang | LiYW 0,22 mm² | LiYW 0,22 mm² |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm ± 0,004 | 8,7 ± 0,87 | Sn | 1,45 ± 0,1 | PVC | 80 | Jiangsu Jiangyang | UL 1007 24AWG | AWM 1007 AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,193 mm | 14–16 | - | 1,4 ± 0,05 | PVC | +90 | LZY | 8030170LZ | LiYW 1x0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 16 ± 2 | - | 1,20 -0,1 | PE | -40/+150 | Prysmian | 20273209 | FLR91X-A hffr 0,22 SW |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm ± 0,008 | 8–12 | Sn | 1,20 ± 0,05 | SR-PVC | -10/+80 | Rishun | AWM 2464 E237675 VW-1SC 80°C 300V 24AWG RISHUN | UL 2464 AWG 24 |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 7,2 ± 1 | Sn | 1,4 ± 1 | PVC | +80 | Jiangsu Hengsen | 9.04.0017 | UL 1007 AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 6 ± 1 | Sn | 1,00 ± 0,05 | SR-PVC | -30/+80 | Kunshan Hanjiang | SP230191 | UL 1571 AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 6 ± 1 | Sn | 1,00 ± 0,05 | SR-PVC | +80 | Kunshan Hanjiang | SP230390 | UL 2725 AWG 24 |
3518-4 S03 | 0,23 | 7 x Ø 0,203 mm | ≤ 8,90 | Sn | 1.2 | SR-PVC | -10/+105 | Klasing | 6019430 | Y-J-UL 2517, 0,23mm² |
3518-4 S03 | 0,23 | 7 x Ø 0,203 mm | ca. 7,7 | Ag | 1,26-1,42 | PTFE | -190/+150 | HEW | VE10503 | PTFE AWG 24/7, UL 1164 |
3518-4 S03 | 0,23 | 7 x Ø 0,203 mm | 8.5 | Ag | 1,35 ± 0,05 | FP-PTFE | -190/+200 | Leoni | 13993 | Fp AWG 24 (7sp) |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 17 | Sn | 1.3 | XPE | -40/+150 | Gebauer & Griller | FLR2X 0,22sn-A/T150-GG#127926 | FLR2x0,22 mm² |
3518-4 S03 | 0,24 | 19 x Ø 0,133 mm | 8 ± 1 | - | 1,15 ± 0,05 | FEP | -5/+150 | KBE | 660024026000GX | Li6Y 2x0,24 120 Ohm |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 22 ± 2,5 | - | 1,35 ± 0,05 | PVC | -15/+70 | Cablena | 10.127.xxx | S03V-R 0.25 |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 22 ± 2,5 | - | 1,35 ± 0,05 | PVC | -15/+70 | Cablena | 10.127.xxx | S03V-R 0.25 |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 22 ± 2,5 | - | 1,35 ± 0,05 | PVC | -15/+70 | Cablena | 10.127.xxx | S03V-R 0.25 |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 22 ± 2,5 | - | 1,35 ± 0,05 | PVC | -15/+70 | Cablena | 10.127.xxx | S03V-R 0.25 |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 14–16 | - | 1,3 ± 0,05 | PVC | -15/+70 | LZY | C3ZZ03000029 | LiY 0,25 mm² |
3518-4 S03 | 0,25 | 19 x Ø 0,127 mm | 8,2 | Ni | 1,16 ± 0,10 | PTFE | +260 | L. Jung | 0231 0090 - 20 | Tefloneinzelader/ AWG24/19 NPC 5Y |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | 12 | - | 1,30 ± 0,10 | PVC | +90 | Coroplast | 6-0324 (0,25/12)-A1 | FLRY 0,25mm² |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | 16 | - | 1,30 ± 0,10 | PVC | +90 | Coroplast | 6-0324 (0,25/16)-A1 | FLRY 0,25mm² |
3518-4 S03 | 0,25 | 7 x Ø 0,199 -0/+0,012 | 8-12 | - | 1,42-1,48 | PVC | -15/+70 | Prysmian | Protodur LiY 0,25mm² | LiY 0,25mm², Kalm Izole 0,25 |
3518-4 S03 | 0,25 | 7 x Ø 0,199 -0/+0,012 | 8-12 | - | 1,22-1,33 | PVC | -15/+90 | Prysmian | Protodur LiYW 0,25mm² | LiYW 0,25mm², Ince Izole 0,25 |
3518-4 S03 | 0,25 | 19 x Ø 0,13 mm | 6 | - | 1,30 ± 0,10 | PFA | +180 | Omerin | D1410024 | Silifon Style 1726-CN51YS |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | 16 ± 3 | - | 1,2 | TPE | +125 | Leoni | 88A00076 | LI31Y 1 x 0,25 mm² |
3518-4 S03 | 0,25 | 14 x Ø 0,15 | 16,62 | - | 1,30 ± 0,05 | PVC | -15/+70 | Arvo | 0040022P | LiYY 2 x 0,25mm² |
3518-4 S03 | 0,25 | 14 x Ø 0,15 | 60 | - | 1,3 | PVC | -5/+70 | Bruns | 311002502 | LiYCY 2x0,25 |
3518-4 S03 | 0,25 | 14 x Ø 0,150 mm | 60 | - | 1,25 ± 0,05 | PVC | -40/+105 | Arvo | 13305 | LiYwYw 4x0,25 sqmm |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | ≤ 19 | - | 1,3 -0,1 | TPE-S | -40/+125 | Coroplast | 8-8500 | FLR31Y 0,25mm²/0,11 |
3518-4 S03 | 0,25 | 19 x Ø 0,12 ± 0,005 mm | 11 ± 2 | Sn | 1,55 ± 0,05 | FEP | +200 | Shenjiang | SJSPRD817 | AWG 24 UL 1332 |
3518-4 S03 | 0,25 | 32 x Ø 0,10 mm | 17.6 | - | 1,27 ± 0,10 | PVC | -20/+105 | ByK | 0113025127400 | FLRY-B 0,25 mm² |
3518-4 S03 | 0,3 | 7 x Ø 0,193 mm | 55 | - | 1,51 ± 0,05 | PVC lead-free | +70 | Condumax | NM 247-3 | Flex Cable 300V 0,30mm2 |
3518-4 S03 | 0,3 | 12 x Ø 0,18 mm | 7,5–9,0 | Sn | 1,6 ± 0,10 | Irradiated PE | 135 | Kurabe | PEX-F | 0.3 mm² |
3518-4 S03 | 0,31 | 12 x Ø 0,18 mm | 15–22 | Sn | 1,40 ± 0,1 | PVC | -15/+70 | Gençler | 0,34 mm² | LiY 03V-K 0.34 mm² |
3518-4 S03 | 0,325 | 19 x 0,15 mm | 9.6 | Sn | 1.6 | Varpren | -30/+125 | Omerin | 37850104 | Varpren 125 UL, AWG 22 Style 3266 |
3518-4 S03 | 0,33 | 7 x Ø 0,24 mm | 20 | Sn | 1.6 | PVC | -5/+80 | Helukabel | 62101 | AWG 22 Einzelader |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | < 15 | - | 1,55 + 0,3 | PVC | +105 | Alstermo | 1569 105 | AWG 23/Style 1569 |
3518-4 S03 | 0,34 | 7 x Ø 0,243 mm | 19,05 | Sn | 1,5 ± 0,08 | PVC | +105 | Copperfield | 22021- | 22 7/.0096 TC AWM 1569 or 1007 TR64 or AWM I A/B |
3518-4 S03 | 0,34 | 7 x Ø 0,254 mm | 10,5 | Sn | 1,60 ± 0,05 | PVC lead-free | +105 | KBE | 4100220410245K | UL22AWG AWM Style 1569 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1,4 ± 0,1 | TPE | +120 | Coroplast | 8-0284 | LI31Y 0,34mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,254 | 10 +/- 3 | - | 1,5 ± 0,1 | PVC | -40/+105 | Leoni China | LC-10-0587 | LiYY 2 x 0.34 |
3518-4 S03 | 0,34 | 19 x Ø 0,16 | 6,4-10,9 | Sn | 1,60 ± 0,10 | Polyolefin, cross-linked | -30/+120 | Medi | 137229M01 | AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 13-15 | Sn | 1,55 | Polyolefin | -40/ +90 | Nexans | 2PJ983 | AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 10 | Sn | 1,40 ± 0,10 | Silicone | +180 | Coroplast | 9-1130 (VM 9-1125) | LI2G 0,34 mm²/ Shore Härte A80 |
3518-4 S03 | 0,34 | 7 x Ø 0,255 mm | 18 | - | 1,25 ± 0,1 | PVC | +70 | Kablo Elektro | MY 47003402 | LiYY 2X0,34mm2 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 16/19 | Sn | 1,58 + 0,05 | PVC | +105 | LTK | SK-1569-020 | AWM Style 1569 22 AWG |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | ≤ 20 | - | 1,60 ± 0,05 | PVC | +105 | Perennial | WL1569E02 | UL1569 22AWG (17/0,16 AS) |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 17 ± 0,05 | - | 1,50 ± 0,05 | PVC | +105 | WanRong | WR10-01 | 2 x 0,34 mm² 300/300 V |
3518-4 S03 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 +/- 0,008 | 15 +/- 1,5 | - | 1,5 ± 0,05 | PVC | -40/+105 | Jiangyang | LiYY 2 x 0,34 mm² | 0,34mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,254 +/- 0,007 | 13-15 | - | 1,4-1,6 | PVC | -40/+105 | Rishun | LiYY 2 x 0,34mm² | 0,34mm² |
3518-4 S03 | 0,34 | 7 x 0,26 mm | 15 | Sn | 1,4 ± 0,1 | PVC | -40/+105 | KBE | 5000340110250A | LiY 0,34 mm² |
3518-4 S03 | 0,34 | 17 x 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | 80 | Leoni | 10.097.999F5007 | AWG 22 |
3518-4 S03 | 0,34 | 7 x 0,25 mm | 18 | Sn | 1,6 ± 0,05 | PVC | 105 | IRCE | 41HG01000324087K | Style 1569 AWG 22 |
3518-4 S03 | 0,34 | 19 x 0,16 mm | 9.6 | Sn | 1.6 | Varpren | -50/+155 | Omerin | 37060102 | Varpren 155, 0,34 mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | ≤ 13 | Sn | 1,25 ± 0,05 | PVC | -25/+105 | Sterner | 061E000047 | KS-LiYv-T 1x0,34 qmm |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 15 | - | 1,40 ± 0,10 | TPE SEBS 55 D | -40/+120 | KBE | 1500340110250S | LI 32Y 0,34 mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 70 | - | 1,50 ± 0,05 | PVC | 70 | Leoni | 83A00034A | LIYY 2x 0,34 bl |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | ≤ 0,8" | Sn | 1.6 | PE | 125 | Furukawa | Beamex-ER470 | AWG 22 |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | 14 | Sn | 1,60 ± 0,05 | PCV | -25/+105 | KBE | 4100230110130K | AWG 23 Style 1569 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 20 | Sn | 1,56 ± 0,1 | PVC | 105 | 3F | UL 1569220_-17 | AWG 22, UL 1569 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | -10/+105 | BizLink | 10.0562.xxxYYYY | UL 1569 AWG 22 |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | 18 ± 3 | Sn | 1,50 ± 0,05 | PVC | -20/+105 | Salcavi | X42650 | AWM Style 1569/ 1007 I A/B AWG 22 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 6,08–13,3 | Sn | 1,6 ± 0,1 | PVC | 105 | Taicheng | Taicheng AWG22 | UL 1569 AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034066901ZN | Li31YYW 6 x 0,34 mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 23 | Sn | 1,3–1,5 | TPE-S | -40/+120 | Coficab | Li32YA0348080 | Li32Y Sn |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 8–12 | Sn | 1,40 ± 0,05 | SR-PVC | +80 | Rishun | AWM 2464 E237675 VW-1 80C 300V 22AWG Rishun | UL 2464 AWG 22 |
3518-4 S03 | 0,34 | 12 x Ø 0,19 mm | 12–14 | Sn | 1,3 ± 0,1 | PVC | -40/+105 | Tri Wire | 197-AC-001 | Hook up wire |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 73 | Sn | 1,21–1,30 | PVC | -25/+80 | Balzer | KSV81510 | LSYY 4 x AWG22 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | < 17 | - | 1,58 +0,05/-0,03 | PVC | +105 | Alstermo | 1288 | AWG 22/Style 1569 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 15 | - | 1,58 + 0,05 | PE FR | +120 | Amokabel | 1517 | RX 0,35 300 V |
3518-4 S03 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 17 | - | 1,30 ± 0,10 | TPE-E | +150 | Gebauer & Griller | 68534 | FLR12Y 0,35-A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 11,5 | - | 1,25 ± 0,05 | Polyolefin | +150 | Huber + Suhner | 12567923 | Radox 155S RW |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 9,53 | Sn | 1,6 | PVC | +105 | Champlain | 1430 / 22107 | 22 7TC 105C 300V 1430 016 XLPVC CSA REW |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +260 | Omerin | 150.15.01.00K | PFA 1x0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +180 | Cet | 150.15.01.00T | PFA 1x0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-035 | 05V-K 0.35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +90 | Prysmian, Turkey | 2006-VS-90-035 | 05V2-K 0.35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,04 | PTFE | +200 | Habia | 404-21033-040 | PTFE 0.35 Z |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 1,58 +0,02/-0,03 | PVC | -25/+105 | KBE | 4100220100194K | UL 22 AWG AWM Stylle 1569 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 8,6 | Sn | 1,25 ± 0,05 | ETFE | +150 | Habia | 504-27012-070 | C3 7Y(Z) AWG22/19 ws |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 ± 0,10 | PVC lead-free | +105 | Coroplast | 6-0111 | FLRY 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm | 20,40 | Sn | 1,35 +0,1/-0,05 | PVC | +105 | Vercavi | HH1035BI00SE | FR3/2 HAT 105 SEZ 1X0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 16 | - | 1,35 ± 0,10 | PVC | +105 | Nursan | K04JG0 | 0,35mm² |
3518-4 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R10789 | |
3518-4 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11529 | |
3518-4 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11575 | |
3518-4 S03 | 0,35 | 19 x Ø 0,15 mm | 20 ± 3 | - | 1, 55 ± 1,6 | TPV | -40/+100 | Nexans | 13050017 | SY 0.35 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,30 ± 0,1 | TPE-E | -40/+150 | Gebauer & Griller | 68534 | FLR13Y-A 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Coficab | BLIY00355000 | LiY |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -40/+90 | Coficab | BLIYW00352500 | LiYW |
3518-4 S03 | 0,35 | 12 x Ø 0,2 mm | 30 ± 10 | - | 1,30 ± 0,1 | PVC | -40/+105 | ICC | C8460004 | FLRY-B |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 ± 3 | - | 1,3 -0,1 | PVC | -40/+105 | Coficab | YA0035xxyy | FLRY-A |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 25,4 | - | 1,501,70 | PVC | +85 | Dixie | MS7889-22 | MIL 120A, GPT-TW, 22AWG |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,4 | XPE | -40/+150 | Gebauer & Griller | 111147 | FLR2x0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,30 - 0,1 | TPE-E | -40/+150 | Leoni | 76M00020 | MOCAR 150C 0,35A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Cu-ETP1 | 1,30 -0,1 | TPE-S | -40/+125 | Leoni | 76M00141 | MOCAR 125 S 0,35-A Deca BDE free |
3518-4 S03 | 0,35 | 7 x Ø 0,254 ± 0,008 mm | - | 1,30 ± 0,10 | TPE-E | -40/+150 | LTK | ST-FL/YA-130M | FLR13Y-A | |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 0.4 | Polyolefine | 125 | Nexans | EPX 125 FR | AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 26 | - | 1,3 ± 0,10 | PVC | 90 | Baohing | C1112828 | FB S03V2-R |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 12-26 | - | 1,5 ± 0,10 | PVC | 70 | Baohing | SWE-FBBH-169-H4WY | H05V-K 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | Sn | 1,25 ± 0,10 | FEP | -50/+180 | Sontec | BT-6901 | SL-FEP | |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,5 ± 0,1 | PVC | +90 | Baohing | FBSBH -204/3-SWR | H05V2-K 0,35mm² | |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 30 | - | 1,25-1,40 | PVC | -40/+125 | Coficab | B300358000S | 0,35 AWG 22 IRT3 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,30 - 0,10 | Soft-PVC lead-free | -40/+105 | Leoni | 76783010# (K999KPK01) | FLRY 0,35-A (AWG 22) |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64240615B | L03VV-F 6x0,35 BL | |
3518-4 S03 | 0,35 | 7 x 0,25 mm | 5-10 | Sn | 1,25 ± 0,03 | PVC | -40/+70 | Leoni | 88030810# | LiY 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | - | 1,2 - 1,3 | PP | -40/+125 | Coficab | 9YA00358000S | FLR9Y-A | |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 32 | Sn | 1,6 ± 0,10 | XLPE | 150 | Baohing | C1307832 | AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | - | 1,25 - 1,40 | PVC | -40/+100 | Coficab | IRT200358000 | IRT2 | |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 27 | - | 1,25 ± 0,05 | PVC | -40/+105 | Coficab | YA00358000S | FLRY-A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 | 10 | Sn | 1,25 ± 0,03 | FEP/FEP | -100/+180 | Coroplast | 18-1153 | LI6Y6Y 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,27 | 25 | - | 1,23 ± 0,04 | XPE, cross-linked | -40/+150 | Gebauer & Griller | 135393 | FLU2X 0,35-A /T150 SW |
3518-4 S03 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3518-4 S03 | 0,35 | 12 x Ø 0,20 | 27 | Sn | 1,4 ± 0,1 | PVC | +70 | Leoni | 88730860A | LiY 1x0,35 SN SKT |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | +70 | Taicheng Tongling | LIY-0.35mm² | LIY 0.35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,193 | 16,8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22----S1 | AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 11 | Sn | 1,35 ± 0,05 | FEP | -55/+150 | Leoni | 89A00019 | LI6Y6Y 1x0,35 SN AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 10 | Sn | 1,35 ± 0,05 | FEP | -25/+180 | Leoni | 89030535A | Li6Y6Y 1x0,35 mm² SN |
3518-4 S03 | 0,35 | 7 x Ø 0,25 | 30 | - | 1,3 ± 0,1 | PVC | -40/+105 | ICC | C738000D | FLRY-B 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 | 30 ± 5 | - | 1,3 ± 0,1 | PVC | -40/+125 | ICC | Cable Fiat 91107/17 | FLR9Y-B 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 | 20,4 | - | 1,25 ± 0,05 | PE | -40/+150 | Acome | T6510 A4F LH A 0.35mm² | 0,35 mm² (AWG22) |
3518-4 S03 | 0,35 | 7 x 0,26 mm | 25 | - | 1,3 - 0,1 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,35-A/ T125 SW-GG#126364 | FLR9Y 0,35-A/ T125, 0,35mm² |
3518-4 S03 | 0,35 | 12 x 0,21 mm | ≤ 27 | - | 1,2-1,4 | XLPE | -40/+125 | Condumex | FLRY-B 0,35mm², blue | 0,35mm² |
3518-4 S03 | 0,35 | 7 x 0,26 mm | 23 | - | 1,3 - 0,1 | ETFE | -65/+180 | Leoni MoCar | 76820010F | Mocar 180E 0,35-A/ 1,25 |
3518-4 S03 | 0,35 | 7 x 0,26 mm | 22 | - | 1,2-1,3 | PVC | -40/+100 | NKT | AP010003 | FLRY-A 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YBSN0035xxyy | FLRY-B |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,35 +0,1/-0,05 | PVC | -10/+105 | Vercavi | HH1035----SF | FR 3/2 1 x 0.35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 ± 0,85 | Ag | 1,3 ± 0,1 | TE-100 | -190/+200 | HEW | 3607 | PTFE Litze AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | ≤ 12,60 | Sn | 1,65 ± 0,05 | Soft PVC | -40/+105 | Arvo | 267221 | LiYv AWG 22/7 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,4 -0,2 | XPE | -40/+150 | Gebauer & Griller | 121350 FLR2X 0,35 A/ T 150-GG#111147 | FLR2X 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 30 | - | 1,25-1,40 | PVC | 105 | Coficab | C.UN.035MM2 PSA T2 NE | PSA 0,35 mm² IR T2 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 17 | - | 1,4 -0,2 | XPE | -40/+150 | Gebauer & Griller | GG# 146234 | FLR2X 0,35(0,15) /T150 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 17 | - | 1,2-1,4 | PP | -40/+125 | Gebauer & Griller | GG# 146238 | FLR9Y 0,35 (0,15)/T125 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 18 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YASN0035xxyy | FLRY-B |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 ± 3 | - | 1,3 -0,1 | XPE | -40/+150 | Coficab | 2X4A0035XXYY | FLR2X T4 0,35mm² A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 15 ± 2 | Sn | 1,40 ± 0,10 | PVC | -40/+105 | KBE | 5000350110250A | LiY 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22---S5 | AWG 22 (0,35 mm²) UL1569 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 16 ± 2 | - | 1,5 ± 0,1 | PVC | ≤ +90 | Salcavi | R46117 | FR70R90S 2x0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | ≤ 27 | - | 1,4 -0,2 | PVC | -40/+105 | Coficab | YB0035XXYY | FLRY-B 0,35 |
3518-4 S03 | 0,35 | 12 x Ø 0,19 mm | 14 | Sn | 1,30 ± 0,05 | PVC | -40/+105 | Telefonika | TT1-4142 | FLRY-B 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 12 | Sn | 1.6 | PVC | -5/+70 | Telefonika | TT1-7129 | LiY c 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2,0 | Sn | 1,40 ± 0,2 | PVC | -5/+70 | Telefonika | TT1-7266v2 | LiY c 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | ≤ 27 | - | 1,20-1,40 | PP | -40/+125 | Coficab | A39YA00354055 | A39Y-3TAD |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,3 -0,1 | PVC | -40/+125 | Coficab | DRYWA0035xxyy | FLRYW 0,35-A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,20-1,30 | PVC | -40/+105 | Coficab | YBF00350540 | YBF |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 20 | Sn | 1,20-1,40 | PE | -40/+150 | Draka | FLR91X-A hffr 0,35 Sn SWWS | FLR91X-A hffr |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 20 ± 5% | Sn | 1,20–1,30 | PVC | -40/+105 | Cablena | 06.102.xxx.x | FLRY-B 0,35 SN |
3518-4 S03 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2 | Sn | 1,40 ± 0,20 | PVC | -5/+70 | Tele-Fonika | TT1-7266v3 | LiYc 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | EFYBSN00358000 | FLRY-B 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 20.5 | - | 1,20–1,30 | PE | -40/+125 | Acome | T5010E | A3BW ZH A 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 20 | - | 1.32 | PE | -40/+150 | Acome | T6436H | A4Z 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 15 ± 3 | - | 1,45 ± 0,1 | PVC | -40/+70 | Cablena | 40.028.300.2 | LiY 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | ≤ 27 | - | 1,40 -0,2 | PP | -40/+125 | Gebauer & Griller | FLR9Y0,35-B/T125 | 0,35mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,2 mm | ≤ 24 | Sn | 1,35 ± 0,04 | PVC | -10/+90 | IRCE | 41V6010003500xxK | S03V2-K 1 x 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 16 | - | 1,2–1,3 | PVC | -40/+105 | Force | P0021996 | FLRY-A 0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,40 ± 0,10 | PVC | -40/+70 | Cablena | 40.070.XXX | LiY 0,35-A Sn |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 15 ± 2 | Sn | 1,65 ± 0,1 | XLPE | 125 | Nistar | NS-D 20046 | AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 12.6 | - | 1,50–1,60 | PE | -40/+150 | Sumitomo | SEPM FLR91X | 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 25 | Sn | 1,3 -0,1 | ETFE | -40/+175 | Gebauer & Griller | 81728 | FLR7Y 0,35 mm² sn-A |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 27 | - | 1,20 -0,1 | ETFE | -40/+175 | Gebauer & Griller | 74 876 | FLU7Y 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 10 | Sn | 1,25 ± 0,03 | Soft-PVC | -40/+70 | Leoni | 88030810 | LiY 1 x 0,35 mm² SN |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | ≤ 20 | Sn | 1,63 ± 0,08 | XLPE | -40/+125 | Champlain | 15-08630-xxx | 3266 AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 20,9–26,1 | - | 1,2–1,3 | PP | -40/+125 | Force | Z-920701302-0 | FLR9Y-A/0.35/125 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 7,5 ± 1 | Sn | 1,40 ± 0,1 | FEP | -50/+180 | BRL | 0230 8132 Rev A | AWG 22 |
3518-4 S03 | 0,355 | 7 x Ø 0,245 mm | 17 ± 10 % | Sn | 1,55 +0,02/-0,04 | PCV | -25/+105 | KBE | 4100225110245K | AWG 22 Style 1569 |
3518-4 S03 | 0,36 | 12 x Ø 0,194 mm | 15 | - | 1,40 ± 0,05 | PVC | -5/+70 | Leoni | 88200132Z | LiY 1 x 0,38 mm² BL |
3518-4 S03 | 0,36 | 12 x Ø 0,194 mm | 15 ± 1,5 | - | 1,58 ± 0,02 | PVC | -10/+105 | Leoni | 89170840A | LiYW 1 x 0,38 mm² BL (AWG 22/ 12) |
3518-4 S03 | 0,38 | 12 x Ø 0,203 mm | 14,4 ± 10 % | Sn | 1,35 ± 0,05 | TETE-302 | -100/+180 | HEW | 23069 | TETE 0,38 mm² |
3518-4 S03 | 0,38 | 19 x Ø 0,16 mm | 8,4 | Sn | 1,911,99 | TE-302 | +150 | HEW | 36247 | HEW-FEP-Aderleitung |
3518-4 S03 | 0,38 | 19 x Ø 0,160 mm | 6/10 | Sn | 1,17 + 0,20 | ETFE | +135 | Draka | 36824 | C3 7Y (Z) 22/19 ws Sp 1500 |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 21/21,6 | - | 1,4 ± 0,05 | VPE | +110 | Kromberg & Schubert | 352118 | FLR2X 0,38 mm²-B |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3518-4 S03 | 0,38 | 7 x Ø 0,20 mm | 17 | - | 1,60 ± 0,05 | PVC | +105 | Jiangyang | 9000162431 | RV 1X0,38mm² |
3518-4 S03 | 0,38 | 19 x Ø 0,16 mm | 12,6 | Sn | 1,7 | Special PVC | +105 | Medi | 120229 | |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 16 | - | 1,60 ± 0,20 | PVC lead-free | +110 | KBE | 1800380000195C | FLYW 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC lead-free | +105 | Leoni, Poland | 88200130M | LiYW 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Leoni China | LC-10-0584 | LiY 0,38 |
3518-4 S03 | 0,38 | 12 x Ø 0,194 | 10-14 | - | 1,4-1,6 | PVC | +80 | Taicheng Tongling | LiY 0,38mm² | LiY 0,38mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,5 ± 0,1 | PVC lead-free | +105 | Leoni | 88730872A | LIYW 1 x 0,38/0,2-S SN SKT |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | Sn | 1,58 + 0,02/-0,03 | PVC lead-free | +105 | Leoni, Mexico | 89170842A | LIYW 0,38 Sn AWG 22/12 UL1569 CSA T1 |
3518-4 S03 | 0,38 | 17 x Ø 0,160 mm | 20 | Sn | 1,60 ± 0,10 | PVC | +80 | Future Max | E174587 | UL 1007/HOOK-UP WIRE |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+105 | Cablena | 1116 | LiYW 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+70 | Cablena | 2335 | LiY 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+105 | Leoni | 88200130 | LIYW |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+70 | Leoni | 88200132 | LIY |
3518-4 S03 | 0,38 | 12 x Ø 0,2 mm | 14 | - | 1,4 | HFFR | -30/+70 | Leoni | 88A00015 | LiH 0,38 |
3518-4 S03 | 0,38 | 12 x Ø 0,2 mm +0,01 | 35 ± 2 | Sn | 1,40 -0,2 | PVC | -40/+105 | Leoni | 76783016K | FLRY 0,35 SN-B |
3518-4 S03 | 0,38 | 12 x Ø 0,194 | 15 +/- 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Leoni China | LC-10-0581 | LiY 0,38 mm² |
3518-4 S03 | 0,38 | 19 x Ø 0,16 ± 0,005 | 15 ± 2 | Sn | 1,55 ± 0,05 | PVC | 80 | Xin Zheng Heng | 22A0455BS1 | AWG 22 |
3518-4 S03 | 0,38 | 19 x Ø 0,16 +/- 0,005 | 15 +/- 2 | Sn | 1,55 +/- 0,05 | PVC | 80 | Xin Zheng Heng | 22A0455RS1 | AWG 22 |
3518-4 S03 | 0,38 | 12 x 0,203 mm | 14,4 ± 10% | Sn | 1,15 ± 0,1 | FEP | -100/+180 | HEW | 68905 | TE-Aderleitung |
3518-4 S03 | 0,38 | 19 x Ø 0,16 mm | 16 ± 3 | Sn | 1.4 | XLPE | 120 | Kurabe | AESSX 0.3f, SP3521K | 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,2 mm | 14 ± 1,4 | Sn | 1,5 ± 0,1 | PA/PVC | +5/+80 | Leoni | 8900000NA | LiY4Y 1x0,38 SN (AWG22/ 12) |
3518-4 S03 | 0,38 | 12 x Ø 0,193 mm | 16–19 | - | 1,45 ± 0,1 | PVC | +70 | LZY | 8030157LZ | LiY 1 x 0,38 mm² |
3518-4 S03 | 0,39 | 19 x Ø 0,17 mm | 15.2 | Sn | 1,60 ± 0,1 | PVC | -30/+105 | Leoni | 89760101A | LiYW 0,39 SN AWG 22 |
3518-4 S03 | 0,5 | 19 x 0,19 mm | 20 | - | 1,6-0,2 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,5-A/ T125 SW-GG#145498 | FLR9Y 0,5-A/ T125, 0,50mm² |
3518-4 S03 | 0,54 | 19 x Ø 0,19 mm | 23 | Sn | 1.6 | XPE | -40/+150 | Gebauer & Griller | FLR2X 0,5sn-A/T150-GG#111603 | FLR2X 0,5 mm² |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
04/2024