35
RAST 2.5 connectors, pitch 2.5/5.0 mm
RAST 2.5 plus™ connector for direct and indirect mating, with double-sided keying, insulation displacement technology (IDT), consecutive placement without loss of pitch
contact pitch 5.0 mm
| 批准 | VDE, cULus |
技术数据
环境条件
Temperature range: -40 °C/+130 °C – 352100
-40 °C/+150 °C – 352300 M30 *1
1) valid for both: upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
物料
Insulating body: PA, V-0 according to UL94 – 352300
PA, V-0 according to UL94 – 352300 M30 *1
Contact spring: CuSn, tin-plated
(6 poles with contact variant V214, CuSn, tin-plated, with lubricant)
1) valid for both: material halogen-free, GWFI 850 °C, GWIT 775 °C
机械数据
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 4,0 N
Withdrawal force/contact: ≥ 0,5 N
IDT区域可连接的导线
Construction: discrete conductor, notched flat cable 2.5 mm
Section min.: 0,35 mm²
Section max.: 0,38 mm²
Insulation diameter: ≤ 1,6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
电气数据（Tamb 20 °C）
Contact resistance: ≤ 5 mΩ
Rated current: 4 A (Tamb 60 °C, VDE/cULus)
2 A (Tamb 100 °C, VDE)
Rated voltage: 250 V AC (VDE/cULus)
配对件
3552
RAST 2.5 pin header, with locking latch and positioning spigot
contact pitch 5.0 mm
355299
RAST-2.5-plus™ pin header, upright, with locking latch and positioning spigot, with double-sided keying
contact pitch 5.0 mm
355295
RAST 2.5 plus™ pin header, upright, in surface mount technology (SMT), with locking latch and one or two positioning spigots, with double-sided keying
contact pitch 5.0 mm
3556
RAST 2.5 pin header, angular, with locking latch
contact pitch 5.0 mm
3542
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3542-1
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3546
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3546-1
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
83546
RAST 2.5 double chassis pin header, with locking latches contact pitch 5.0 mm
配件
线束组装设备
HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard
KHP35 plus
Knuckle-joint press for termination of RAST 2.5 plus™ connectors in insulation displacement technology (IDT)
HA35 plus
Semiautomatic harnessing machine for termination of RAST 2.5 plus™ connectors in insulation displacement technology (IDT), with integrated cable color detection
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
批准的电线
批准的电线，用于 352300 Download (PDF)
| 导体 | 绝缘 | 制造商 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | 截面积 （mm²） |
结构 | 绞距 （mm） |
表面处理 | 直径 （mm） |
材料 | 温度范围 （°C） |
名称 | 名称 | 描述 |
| 352300 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 16 | - | 1,40 ± 0,05 | PVC | -40/+70 | KBE | 2020 11 30 02 | LiY 0,22 mm²/ 70° |
| 352300 | 0,22 | 7 x Ø 0,2 mm | 9 -2,0 | - | 1,15 ± 0,05 | PVC | -5/+105 | Leoni | 8900003IA | LiYW 1 x 0,22 mm² BL UL 11324 |
| 352300 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 7–9 | - | 1,15 ± 0,05 | PVC | -5/+90 | Leoni | 8800001MA | LiYW 1x0,22 BL |
| 352300 | 0,24 | 19 x Ø 0,127 mm | 16 ± 4 | - | 1,53 ± 0,1 | PVC | -20/+105 | Salcavi | X13638 | 1 x AWG 24 |
| 352300 | 0,34 | 7 x Ø 0,25 mm | 12.6 | Sn | 1,30 ± 0,05 | PVC | -30/+80 | Medi | 122227 | AWG 22, Style 1061 |
| 352300 | 0,34 | 17 x Ø 0,16 mm ± 0,008 | 18 ± 2 | Sn | 1,58 ± 0,05 | PVC | -40/+80 | BizLink Changzhou | 10.097.xxxYYYYY | UL 1007 AWG 22 |
| 352300 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -40/+90 | Coficab | BLIYW00352500 | LiYW |
| 352300 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Coficab | BLIY00355000 | LiY |
| 352300 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 1,58 +0,02/-0,03 | PVC | -25/+105 | KBE | 4100220100194K | UL 22 AWG AWM Stylle 1569 |
| 352300 | 0,35 | 7 x Ø 0,245 mm | 16.8 | - | 1,55 ± 0,1 | PVC | -15/+105 | Vercavi | HH1035----0P | FR 3/2 1x0,35 mm² |
| 352300 | 0,35 | 7 x Ø 0,254 mm | 18 +7/-2 | - | 1,55 ± 0,05 | PVC | -20/+90 | Salcavi | R13048, R13049, R13050, R13051, R13052 | FR7 1 x 0,35 mm² |
| 352300 | 0,35 | 7 x Ø 0,245 mm | 16.8 | - | 1,55 ± 0,1 | PVC | -15/+105 | Vercavi | HH1035---0P | FR 3/2 1x0,35 mm² |
| 352300 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | EFYBSN035xxyy | FLRY-B 0,35 sn |
| 352300 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,40 ± 0,05 | PVC | -15/+70 | Gençler | BSH-FLC | 03V-K 0,38 mm² |
| 352300 | 0,36 | 7 x Ø 0,254 mm | 8.5 | Ag | 1,17–1,37 | PTFE | -190/+105 | HEW | 45407 | AWG 22 |
| 352300 | 0,36 | 12 x Ø 0,194 mm | 15 | - | 1,40 ± 0,05 | PVC | -5/+70 | Leoni | 88200132Z | LiY 1 x 0,38 mm² BL |
| 352300 | 0,36 | 7 x Ø 0,254 mm | 10 | Sn | 1,58 ± 0,05 | PVC | +105 | BizLink Changzhou | 10.467.xxxYYYY | AWG 22 UL 1569 |
| 352300 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+105 | Cablena | 1116 | LiYW 0,38 mm² |
| 352300 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+70 | Cablena | 2335 | LiY 0,38 mm² |
| 352300 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+105 | Leoni | 88200130 | LIYW |
| 352300 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+70 | Leoni | 88200132 | LIY |
| 352300 | 0,38 | 12 x Ø 0,194 ± 0,006 mm | 15 | - | 1,4 ± 0,05 | PVC | -15/+70 | KBE | 730038015001EE | LIYY 0,38mm² |
| 352300 | 0,38 | 12 x Ø 0,194 | 24 | - | 1,4 ± 0,05 | XLPE | -30/+125 | Leoni | 89300020# | Li2X 0,38mm² |
| 352300 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 | - | 1,40 ± 0,05 | PVC | -15/+70 | KBE | 5000380120198E | LiY 0,38 mm² |
| 352300 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+70 | BizLink Changzhou | 20.0378.xxxYYYYY | LiY 0,38 |
| 352300 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+105 | BizLink Changzhou | 20.0379.xxxYYYYY | LiYW 0,38 |
| 352300 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,45 ± 0,05 | PVC | -40/+70 | BizLink Changzhou | 20.0584.xxxYYYYY | LiY 0,38 |
| 352300 | 0,38 | 12 x Ø 0,20 mm | 27 | - | 1,4 ± 0,1 | PVC | +5/+90 | Leoni | 88730856K | LiYW 1x0,38 BL |
| 352300 | 0,38 | 12 x Ø 0,2 mm +0,01 | 35 ± 2 | Sn | 1,40 -0,2 | PVC | -40/+105 | Leoni | 76783016K | FLRY 0,35 SN-B |
| 352300 | 0,5 | 19 x Ø 0,182 mm | 22 ± 2,2 | - | 2,10 ± 0,05 | PVC | -15/+90 | Gençler | BSH FLC | H05V2-K 0,50 mm² |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
11/2024