36
RAST 5 connectors, pitch 5.0 mm
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with locking on tab, consecutive placement without loss of pitch
| 批准 | VDE, cULus |
技术数据
环境条件
Temperature range: -40 °C/+125 °C – 3625 01
-40 °C/+130 °C – 3625 01 M08
-40 °C/+130 °C – 3625 01 M20 *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
物料
Insulating body: PA, V-2 according to UL94 – 3625 01
PA, V-2 according to UL94 – 3625 01 M08
PA, V-0 according to UL94 – 3625 01 M20 *1
Contact spring: CuSn, silver-plated
1) M08: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
M20: material halogen-free, GWFI 850 °C (0.4 mm), GWIT 775 °C (0.4 mm)
机械数据
Mating with: tab contact 6.3 mm x 0.8 mm according to DIN 46244
Insertion force: ≤ 50 N *1
Withdrawal force: ≥ 15 N *2
1) measured with a polished flat steel pin, nominal thickness 0.8 mm
2) measured with a polished flat steel pin, nominal thickness 0.8 mm
IDT区域可连接的导线
Construction: discrete conductor, notched flat cable 5.0 mm
Section min.: 0,75 mm²
Section max.: 1,5 mm²
Insulation diameter: ≤ 3,0 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
电气数据（Tamb 20 °C）
Contact resistance: ≤ 5 mΩ
Rated current: 16 A (1.0–1.5 mm², Tamb 70 °C, VDE/ULus)
16 A (1.5 mm², Tamb 70 °C, cUL)
12 A (1.0 mm², Tamb 70 °C, cUL)
Rated voltage: 250 V AC (VDE/cULus)
配对件
3641 V167
RAST 5 tab header, upright, with positioning spigot, contact tab silvered
364197 V167
RAST 5 tab header, upright, with positioning spigot, pottable version, contact tab silvered
3642 V167
RAST 5 tab header, angular, with topside lock, contact tab silvered
3643 V167
RAST 5 tab header, angular, with lower side lock, contact tab silvered
3645 V167
RAST 5 tab header, angular, with lower side lock, higher version, contact tab silvered
3644 V167
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigots, contact tab silvered
线束组装设备
HZ-M36
Modular manual tongs for termination of RAST 5 connectors in insulation displacement technology (IDT)
HZ36-K
Hand tongs for keying of pre-terminated RAST 5 connectors according to RAST 5 standard
KHP36
Knuckle-joint press for termination of RAST 5 connectors in insulation displacement technology (IDT)
HA36e
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT)
HA36e-CA
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), with integrated cable color detection
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
新
VARICON 7000-Unica-36
Fully automatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), for divers harness configurations
VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
批准的电线
批准的电线，用于 3625 01 Download (PDF)
| 导体 | 绝缘 | 制造商 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | 截面积 （mm²） |
结构 | 绞距 （mm） |
表面处理 | 直径 （mm） |
材料 | 温度范围 （°C） |
名称 | 名称 | 描述 |
| 3625 01 | 0,75 | 24 x Ø 0,21 mm | 30 | Sn | 2,3 +0,05/-0,10 | PVC | -15/+90 | KBE | 35007500101905 | H05V2-K 0,75² |
| 3625 01 | 0,78 | 16 x Ø 0,25 mm | 50,8 | - | 2,74 | PVC | +105 | American | AWG 18 16/30 PVC Red | 18ga. 16/30 BC 2/64 PVC UL 1015/1230 |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,75 ± 0,05 | PVC | -40/+70 | Cablena | 4898 | H05V-K |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,75 ± 0,05 | PVC | -40/+125 | Cablena | 27006730 | H05V2-K |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,75 ± 0,05 | PVC | +70 | Cablena | 9055700 | H05V-K |
| 3625 01 | 1 | 32 x Ø 0,194 +/- 0,006 | 22 +/- 2,2 | - | 2,75 +/- 0,05 | PVC | -40/+105 | Cablena | 7351 | H05V2-K 1,00 |
| 3625 01 | 1 | 32 x Ø 0,194 +/- 0,006 | 22 +/- 2,2 | Sn | 2,75 +/- 0,05 | PVC | -40/+105 | Cablena | 7352 | H05V2-K 1,00 |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 ± | Sn | 2,8 ± 0,1 | PVC | -15/+90 | Coficab | B52SN01006500 | H05V2-K |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,8 ± 0,1 | PVC | -40/+125 | Coficab | B59SN01005500 | A05V9-K |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 ± | Sn | 2,8 ± 0,1 | PVC | -15/+70 | Coficab | B51SN01005000 | H05V-K |
| 3625 01 | 1 | 29 x Ø 0,21 mm | 39 | - | 2,5 | PVC | +90 | Coroplast | 5-7022-3G1-B1-08.04.05 | H05V2V2-F 3G1mm² |
| 3625 01 | 1 | 19 x 0,254 mm ribbon cable | 21 | Sn | 2,6 +/- 0,1 | PVC | 105 | Elumeg | 132 11 416 1, 132 11 416 2, 132 11 416 3 | LiYY- t 1 mm² / 3,60mm |
| 3625 01 | 1 | 32 x 0,20 mm | 30-40 | - | 2,75 +/- 0,08 | PVC | -40/+105 | Emek | 31700801.W99 | 1,00mm² Green/ Yellow LiY 105 C |
| 3625 01 | 1 | 32 x 0,20 mm | 30-40 | - | 2,75 +/- 0,08 | PVC | -40/+105 | Emek | 31702801.W09-W02-W07 | 1,00mm² LiY |
| 3625 01 | 1 | 19 x Ø 0,254 mm | 18 | Sn | 2,85 ± 0,1 | PVC | +105 | Leoni | 89160611A | LiYW 1,0 SN AWG 18/19 UL 1015 |
| 3625 01 | 1 | 32 x Ø 0,20 mm | 22 | Sn | 2,75 | PVC | -40/+70 | Leoni | 60200840 | H05V-K |
| 3625 01 | 1 | 32 x Ø 0,20 | 22 | Sn | 2,75 ± 0,05 | PVC | -40/+90 | Leoni | 60A00077 | H05V2-K 1x1,0 SN |
| 3625 01 | 1 | 32 x Ø 0,20 | 22 | - | 2,75 ± 0,05 | PVC | -40/+90 | Leoni | 60A00078 | H05V2-K 1x1,0 BL |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,85 ± 0,1 | PVC | +105 | Leoni | 89160612A | LiYW 1,0 SN AWG 18/32 UL 1015 |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,7 + 0,05 | PVC | +90 | Leoni | 60170030Z | H05V2-K 1,0 mm² vz |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | Sn | 2,75 ± 0,05 | PVC lead-free | +70 | Leoni, Poland | 60200840A | H05V-K 1x1,0mm² SN SKT |
| 3625 01 | 1 | 32 x Ø 0,19 mm | 36 | - | 2,5 | PVC lead-free | +70 | Leoni, Turkey | 68044 | H05V-K 1,0 |
| 3625 01 | 1 | 32 x Ø 0,19 mm | 36 | - | 2,5 | PVC lead-free | +90 | Leoni, Turkey | 72016 | H05V2-K 1,0 |
| 3625 01 | 1 | 19 x Ø 0,254 ± 0,01 mm | - | 2,6 ± 0,10 | PVClead-free | +70 | Lonsid | LD-060100002-11 | 60227 IEC 06 (RV) | |
| 3625 01 | 1 | 31 x Ø 0,20 mm | 32,6 | - | 2,4 | PVC | +70 | Pirelli, Turkey | 79945 | H05V-K 1,0 300/500 V |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 | - | 2,75 ± 0,05 | PVC | -15/+90 | KBE | 3101000000194T | H05V2-K 1,0 mm² |
| 3625 01 | 1 | 32 x Ø 0,195 mm | 30 | Sn | 2,75 ± 0,05 | PVC | +70 | KBE | Muster LUM 1,0 1/00 | H05V-K 1,00 mm² |
| 3625 01 | 1 | 30 x Ø 0,21 mm | 35 | - | 2,4 + 0,4 | PVC lead-free | +70 | KBE | 3301000000190E | H05V-K 1,00 mm² |
| 3625 01 | 1 | 28 x Ø 0,21 mm | 35,2 | - | 2,39 ± 0,05 | PVC | +70 | Prysmian | 9311DQ31 | H05VV-F 3 X 1 mm² |
| 3625 01 | 1 | 31 x Ø 0,20 mm | 33 | - | 2,40 + 0,40 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-100 | H05V-K 1.00 mm² |
| 3625 01 | 1 | 32 x Ø 0,193 mm | 27 ± 1 | - | 2,47 ± 0,1 | PVC | -20/+70 | Salcavi | R13810 | H05V-K S |
| 3625 01 | 1 | 32 x Ø 0,20 +/- 0,010 | 20-30 | - | 2,6 ± 0,10 | PVC | +70 | Baohing | SWE-VDEBH-276-H4W | H05V-K 1,0mm² |
| 3625 01 | 1 | 32 x Ø 0,20 mm | 36 | Sn | 2,50 ± 0,10 | PVC | +180 | Silitherm | ST0403$ | SIF-VDE |
| 3625 01 | 1 | 32 x Ø 0,193 | 22 +/- 2 | Sn | 2,75 ± 0,1 | PVC | -40/+105 | Vercavi | HD1100RO00S4 | H05V2-k 1 x 1,0mm² |
| 3625 01 | 1 | 32 x Ø 0,193 mm | 41,9 | - | 2,5 ± 0,1 | PVC | -15/+105 | Vercavi | HH1100----0C | FR3/2 HAT 105 SEZ 1x1,0 |
| 3625 01 | 1 | 32 x Ø 0,193 mm | 29,4 | - | 2,55 ± 0,1 | PVC | -15/+105 | Vercavi | HH1100VEGI03 | FR3/2 1,00 mm² |
| 3625 01 | 1 | 32 x Ø 0,193 | 22 +/- 2 | - | 2,75 ± 0,1 | PVC | -40/+105 | Vercavi | HD1100VEGI04 | H05V2-K 1 x 1,0mm² |
| 3625 01 | 1 | 32 x Ø 0,193 mm | 29,4 | Sn | 2,55 ± 0,1 | PVC | -15/+105 | Vercavi | HH1100RO00S3 | FR3/2 1,00 mm² |
| 3625 01 | 1 | 32 x Ø 0,194 mm ± 0,006 | 22 ± 2,2 | Sn | 2,75 ± 0,05 | PVC | -5/+90 | Leoni | 60A00077A | H05V2-K 1x1,0 SN |
| 3625 01 | 1 | 32 x Ø 0,21 mm | 32 | - | 2,4–2,8 | PVC | -15/+90 | Coficab | 08IEC0100XXYY | H05V2-K |
| 3625 01 | 1 | 32 x Ø 0,21 mm | ≤ 65 | - | 2,4–2,8 | PVC | -15/+90 | Coficab | 52KS0100XXYY | H05V2-K 1 mm² |
| 3625 01 | 1 | 32 x Ø 0,194 mm | 22 ± 10% | - | 2,75 ± 0,05 | PVC | -5/+90 | Leoni | 60A00078A | H05V2-K 1 x1,0 BL |
| 3625 01 | 1 | 57 x Ø 0,15 mm | 35 | - | 2.4 | PVC | 60 | Leoni | 5001478/5001479 | H05VV-F 3G1,00 |
| 3625 01 | 1 | 32 x Ø 0,194 mm ± 0,006 | 35 ± 10 % | - | 2,6 ± 0,2 | PVC | -40/+70 | Cablena | 16.006.70x.2 | H05V-K 1,00 |
| 3625 01 | 1 | 32 x Ø 0,20 mm | 15 | - | 2,50 ± 0,1 | Silicone | 180 | BLF | 4J/ 2843.... | EI2-FG4/2 |
| 3625 01 | 1 | 32 x Ø 0,20 mm | 15 | - | 2,50 ± 0,1 | Silicone | 130 | BLF | 4J/ 2843135300/ 01 | SIL/ 0100F 1,00 mm² |
| 3625 01 | 1 | 32 x Ø 0,194 mm ± 0,006 | 22 | Sn | ≤ 1,50 | PVC | -15/+70 | KBE | 3101000030194E | H05V-K 1,00 mm² |
| 3625 01 | 1,25 | 19 x Ø 0,29 mm | 19 | Sn | 2,92 ± 0,05 | Silicone | 200 | Rowe | SW16WS3322 | AWM Style 3322 |
| 3625 01 | 1,3 | 40 x Ø 0,21 mm | 44 | - | 3,25 ± 0,12 | PVC | +105 | Draka | 10172130 | AWG 16 AWM 1015/1011/ CSA |
| 3625 01 | 1,3 | 26 x Ø 0,254 mm | 35 | Sn | 2,3 | PVC | -10/+105 | Leoni | 10.560.xxxV5310 | AWM 1569 16AWG VW-1 |
| 3625 01 | 1,32 | 26 x Ø 0,254 mm | 38 | Sn | 2,4 ± 0,10 | XLPE | 150 | Baohing | C1307831 | AWG 16 |
| 3625 01 | 1,32 | 26 x Ø 0,26 mm | Sn | 1,55 | PVC | -30/+105 | Leoni | 89460160 | LIYW 1.32 SN AWG16/26 | |
| 3625 01 | 1,32 | 26 x Ø 0,26 mm | 22 ± 2 | Sn | 2.35 | Soft PVC | 105 | Leoni | 89460162 | AWG 16/ 26 |
| 3625 01 | 1,32 | 26 x Ø 0,254 mm | 51 | Sn | 2,4 ± 0,10 | Soft PVC | 105 | Baohing | ULBH-328T/3-KBL | AWG 16/ 26 |
| 3625 01 | 1,32 | 26 x Ø 0,254 mm | 51 | Sn | 2,40 ± 0,10 | PVC | 105 | Baohing | 102010140160 XX | AWG 16 UL 1569 |
| 3625 01 | 1,34 | 19 x Ø 0,30 mm | 16,7 | Sn | 2,33 ± 0,1 | Polyolefin | +125 | Huber + Suhner | 12522816 | UL 3266/CSA AWM I A/B |
| 3625 01 | 1,34 | 19 x Ø 0,30 mm | 50 | Sn | 2,4 | Polyolefin | +145 | Studer | Betatherm 145 AWG 16 | AWM 3266/ CSA-CSL 1252 |
| 3625 01 | 1,35 | 37 x Ø 0,215 mm | 15,4 | - | 3 ± 0,2 | PVC | +105 | Alstermo | 1144A | AWG 16 1596 ASKO 3,0 |
| 3625 01 | 1,35 | 37 x Ø 0,215 mm | 15,4 | - | 2,5 ± 0,2 | PVC | +105 | Alstermo | 1144B | AWG 16 1596 ASKO 2,5 |
| 3625 01 | 1,38 | 44 x Ø 0,20 mm | 30,8 | Sn | 2,35 ± 0,05 | PVC | +105 | KBE | 4100160110200K | AWG 16 AWM 1569/1007 |
| 3625 01 | 1,38 | 41 x Ø 0,203 | 48 | Sn | 2,5 ± 0,10 | PVC | -30/+105 | Medi | 120160 | Style1007/ 1569 AWG16 |
| 3625 01 | 1,5 | 50 x Ø 0,19 mm | 25 | - | 2,50 + 0,2 | PVC | +105 | Amokabel | 1476 | AWG 16 1569 Flex Slits |
| 3625 01 | 1,5 | 26 x Ø 0,25 mm | 31,75 | - | 2,3 | PVC | +105 | Cable Tech | 702898 | AWG 16/ UL 1569/1007 |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | - | 2,9 | PVC | +90 | Cablena | 18.058 | H07V2-K 1,5 mm2 |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | Sn | 2,95 ± 0,05 | PVC | -40/+90 | Cablena | 2102 | H07V2-K |
| 3625 01 | 1,5 | 30 x Ø 0,25 mm | 34,5 | Sn | 2,9 ± 0,1 | PVC | +105 | Isomet | 11411369 | H07V2-K/TQ Litze 1,50 mm² |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | Sn | 2,95 ± 0,05 | VP1398/044 | +90 | KBE | 5201500030244M | So-Ltg. 1,5 mm² vz |
| 3625 01 | 1,5 | 30 x Ø 0,245 mm | 32 | Sn | 2,95 ± 0,05 | PVC | +90 | KBE | 3101500030244T | H07V2-K 1,5 mm² vz |
| 3625 01 | 1,5 | 44 x Ø 0,20 mm | 30,8 | - | 3,6 ± 0,1 | PVC | +105 | KBE | 4100160000200K | UL 16 AWG AWM Style 1569 |
| 3625 01 | 1,5 | 30 x Ø 0,26 mm | 38 | - | 2,85 ± 0,10 | PVC | +70 | KBE | 3401500000235E | H07V-K 1.50 mm² |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | Sn | 3 ± 0,1 | PVC | +90 | KWL | 641108.86 | H07V2-K 1,5 mm² vz |
| 3625 01 | 1,5 | 29 x Ø 0,25 mm | 18,7 | - | 2,8-3,4 | PVC | -20/+90 | Lapp | DB0026001DE | Ölflex H07V2-K (AWG15) |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | Sn | 2,95 ± 0,05 | PVC lead-free | +105 | Leoni | 89170830A | LiYW 1,5 VZ AWG 16/30 UL 1569CSAT1 |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 45 | Sn | 3 ± 0,1 | PVC | +90 | Leoni | 601000040M | H07V-K 1x 1,5 mm² SN 90C |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | Sn | 3 ± 0,1 | PVC | +70 | Leoni | 60220100Z | H07V-K 1,5 mm² vz |
| 3625 01 | 1,5 | 30 x Ø 0,24 mm | 43,5 | - | 2,9 | PVC lead-free | +70 | Leoni, Turkey | 85062 | H07V-K 1,5 |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 22 | Sn | 2,95 ± 0,05 | PVC lead-free | +90 | Leoni, Turkey | 60191100Z | H07V2-K 1,5 mm² vz |
| 3625 01 | 1,5 | 28 x Ø 0,24 mm | 33 | Sn | 2,9 | PVC | +70 | Nexans Iko | 110 478XXX 12 | |
| 3625 01 | 1,5 | 28 x Ø 0,26 mm | 33 | Sn | 2,95 ± 0,1 | PVC | +70 | Nexans Iko | 22532700798 | H05VV-F 3G1,5 mm² |
| 3625 01 | 1,5 | 32 x Ø 0,23 mm | 35 | - | 1,55 | PVC | +70 | Nexans Iko | S04057 | H05VV-F 3G1,5 mm² |
| 3625 01 | 1,5 | 30 x Ø 0,25 mm | 47 | Sn | 2,84 | PVC | +70 | Pirelli, Turkey | 79921 | H07V-K (Sn) 450/750 V |
| 3625 01 | 1,5 | 26 x Ø 0,254 mm | 30 | Sn | 2,90 +/- 0,10 | PVC | +105 | Lonsid | LD-101516001-11 | AWG 16 |
| 3625 01 | 1,5 | 29 x Ø 0,25 mm | 36 | - | 2,80 + 0,20 | PVC lead-free | +90 | Prysmian, Turkey | 2006-VS-90-150 | H07V2-K 1.5 mm² |
| 3625 01 | 1,5 | 29 x Ø 0,25 mm | 36 | - | 2,80 + 0,20 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-150 | H07V-K 1.50 mm² |
| 3625 01 | 1,5 | 30 x Ø 0,244 mm | 20 | Sn | 2,85 ± 0,1 | PVC | +70 | Salcavi | R10882 | H07V-K 1 x 1,50 mm2 |
| 3625 01 | 1,5 | 30 x Ø 0,243 mm | 28 ± 2 | Sn | 2,8 ± 0,1 | PVC | -20/+70 | Salcavi | R13270 | H07V-K 1x 1,5mm² |
| 3625 01 | 1,5 | 30 x Ø 0,25 mm | - | 3,05 +0,05/-0,10 | PVC | +70 | Baohing | SWE-VDEBH-279-H4W | H07V-K | |
| 3625 01 | 1,5 | 26 x Ø 0,254 mm | 2233 | Sn | 3,0 ± 0,05 | PVC | +105 | Baohing | ULSBH-267T/3-MZ | AWG 16 |
| 3625 01 | 1,50 | 30 x Ø 0,243 mm | 28 ± 2 | Sn | 2,8 ± 0,1 | PVC | -20/+70 | Salcavi | R13269 | H07V-K 1x 1,5mm² |
| 3625 01 | 1,55 | 30 x Ø 0,244 mm | 22 | Sn | 2,95 ± 0,05 | PVC | +105 | KBE | 4100160110244K | 16 AWG/ UL-AWM Style 1569 |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
11/2024