37
RAST 7.5 Power™ connectors, pitch 7.5 mm
RAST 7.5 Power™ connector for indirect mating, insulation displacement technology (IDT), with exterior locking, consecutive placement without loss of pitch
技术数据
环境条件
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
物料
Insulating body: PA, V-2 according to UL94 *1
Contact spring: CuNiSi, silver-plated
1) component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
机械数据
Mating with: tab contact 6.3 mm x 0.8 mm according to DIN 46244
Insertion force: ≤ 95 N *1
Withdrawal force: ≥ 45 N *2
1) measured at a mating pair of connectors 3690 02/3695 02
2) measured at a mating pair of connectors 3690 02/3695 02
IDT区域可连接的导线
Construction: discrete conductor
Section max.: AWG 14 (2,5 mm²)
Insulation diameter: 3,6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
电气数据（Tamb 20 °C）
Contact resistance: ≤ 5 mΩ
Rated current: 25 A (Tamb 85 °C)
Rated voltage: 500 V AC
配对件
线束组装设备
批准的电线
批准的电线，用于 3723 Download (PDF)
| 导体 | 绝缘 | 制造商 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | 截面积 （mm²） |
结构 | 绞距 （mm） |
表面处理 | 直径 （mm） |
材料 | 温度范围 （°C） |
名称 | 名称 | 描述 |
| 3723 | 2,04 | 19 x Ø 0,41 mm | 19 | Sn | 3,40–3,55 | PVC | -40/+105 | Coficab | 1015SN14019 | UL 1015/ 1230 sn |
| 3723 | 2,5 | 19 x Ø 0,41 mm | 19 | Sn | 2,85 ± 0,15 | -40/+150 | Huber + Suhner | 12583399 | Radox 155S FLR | |
| 3723 | 2,5 | 50 x Ø 0,26 mm | 50 | - | 3,4–4,1 | PVC | -15/+90 | Coficab | 72KS0258080 | H07V2-K 2,5 mm² |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
04/2024